I have toshiba 46rv600a. how do i take the base of so i can mount it to the wall?

In the link. You can use the wall mount with a base.

https://www.google.com/search?q=table+stop+stand+for+Toshiba+model+32lv67u

..

Contact the nearest authorised service center for Toshiba at your town. They can either supply a new one, or can give details about it availability to you.

Electronics stores don't sell bases for TVs.

Each TV comes with one base, each base comes with a TV. The only way to get a replacement base would be to contact Toshiba and ask them directly for a replacement. For this to work, you'd need the model number of the tv. This can generally be found when you look at the back of the TV, it will have the label on a small sticker somewhere on the back.

Once you have the model number, try doing a quick search on Ebay. Someone may have an old base there that they no longer need, otherwise you're stuck with a wall mount or with contacting Toshiba.

Unfortunately the TV is not designed to mount on wall. Hence there is no wall mount bracket available from Toshiba to install it.. However, if you have a base in your wall you can use the supplied clip to hold it on the wall from leaning forward..
If you lost the manual, you can download the manual from the following link:
http://www.mytoshiba.com.au/support/televisions/lcd-tv/wl58a/42wl58a/download

First you should lay the unit face down on a blanket or the like, being careful NOT to damage the screen. I don't have one in front of me right now but if memory serves well, there is a plastic cover on the back side of the base that you can pop off giving you access to the base mounting screws. Remove the 4 screws and viola, the base should slide off.

The base is removed and turned 180 degrees and put back on phone notice the slide tabs are in correct position and can noe be hung by screws or a wall jack. Where the cord plugs in there is a breakout tab, that is the insert to hold the reciever on the phone when hung up.

Hi wsolem3
The base can be purchased here http://www.encompassparts.com/products/?72796233

Let me know if I can assist further.
Lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

You don't have to mess around with the screws on the bottom of the base.

There are 4 screws on the back of the Toshiba that are in line with the wall mounting screw holes.

Remove the 4 screws and the base falls off.

how do you remove the stand of lg 50pg30fd so it can be wall mounted

I have just completed removing tha base from a Toshiba 52 inch HDTV. There are 5 screws in total. Three about 8 inches form the base and another 2 about 4 inches from the base in the arrangement shown below

(X) is a screw
(l) center line

X X X 3 screws 8 inches from base
X l X 2 screws 4 inches from base
______l______ The base

Keep your feet clear as your undoing the last screw..the base slides out vertically downward and weighs about 10-15 pounds so keep your the toes, fingers etc safe. The risk of being sued may explain why Toshiba didn't this publish in the US manual.