TRYING TO PAIR THE H700 TO MY TMOBILE WING

Hello...
I think you are trying to pair this bluetooth with your tmobile phone... Is this correct?
If so, here is a link to how to pair this bluetooth device... > http://wiki.answers.com/Q/How_do_you_troubleshoot_the_motorola_H700_bluetooth_headset

Hopefully that helps...

I think there are some H700 headsets which support smart find. If this is your case, you must ensure that all the bluetooth enabled devices, which have been previously paired with it, have their bluetooth radios turned off. Then, some 5 seconds after you open the headset's boom, the light should become steadily lit, thus indicating it is in pairing mode. Otherwise (i.e. if it doesn't support smart find), with its boom closed, press the call button for some 5 seconds, until the light is steadily lit. Then, open the boom. Either way, turn on the bluetooth radio of the device you now want to pair your headset with, and make it search for new devices. After a while, the H700 should appear in the device' screen. Select it and make it connect. If a pairing code (or PIN or passkey) is requested, enter '0000' (four zeros).
Hope you are able to sort your problems out.
By the way, if your headset's quick start guide happens to be missing, feel free to download it from this location.

Regards, Carlos

Already found the solution. Followed an instruction that was verbatum VERY AWESOME! Thank you!

Hold down the connect button on headset until steady purple light comes on, then open the boom.

Search for Bluetooth devices on the phone. When asked for a pin, use "0000". Now the H700 will show up in the Bluetooth device list, but it will not connect. Put the headset in pairing mode again, this time go to the h700 listed on the phone and select connect. Now the devices will work as normal. When you open the boom on the h700, it will connect to the phone.

after pair successful highlight the headset and hit connect

You will need to enter pairing mode on your device. The H700 User Manual indicates that you do so by first turning off any previously paired device and opening the headset BOOM. The indicator light should light a steady purple while in pairing mode.

You may not need to turn off your phone if you do not desire this, you may be able to get by turning the blue tooth function off and on, on your phone and attempt to pair again.

Pairing Pin is likely 0000.

First of all, the Nokia 2600 is not a blue tooth phone.

If you should get a Nokia phone that supports blue tooth your best bet would be to make sure any previously paired devices are turned off.

Then make sure that blue tooth is enabled on your phone. For most Nokia models its as follows;

Menu > Settings > Connectivity > Bluetooth > Bluetooth On

Then attempt to put your device in pairing mode.

Return to;
... > Bluetooth > Search Audio Enhancements

If your phone supports Bluetooth the phone should and device should pair after you enter the pairing pin, usually 0000.

Johnny_Nh, to answer your question, different Models are equipped with blue tooth when they are manufactured. Also, there are different versions of bluetooth, 1.0 and 2.0. If you have an older phone supporting Bluetooth 1.0 you will not be able to use a bluetooth 2.0 headset.

Hi,

Try 0000

Mike @ compurepair.

Hi,
When trying to pair the device.
push the blutooth buttons vol up/down et,c.

The phone is trying to locate the headsets frequency.
By pressing different buttons on the bluetooth, the phone can detect it,s signal.

Mike @ compurepair.

Steps to pair a H700 headset with any bleutooth pone:

1. Make sure the H700 fully chared (very important)!!
2. Make sure the microphone boom is folded closed, i.e. power is off!
3. Hold the call button for 1-5 seconds until the light is steady lit purple
4. Flip out the microphone boom, the light should stay lit purple!

Now you are ready to pair the headset with your phone, so follow the pairing instructions of your phone.

Note: When prompted for the Passkey; it is most likely 0000 but the correct Passkey should be on the headset accessory instructions.

I must add that indeed my headset on occation (once or twice every three months) also loses its connection with the blackberry (a 8703e) . At which time I have to remove the headset from my phone bluetooth device list, and start the above described steps to pair my headset with the phone again.