Please turn camera off and then on again. it

Question 1

6helpful

1answer

Aperture ring won't turn

When the camera is set to autofocus, let the camera do the focusing. If you want to focus manually, turn off the autofocus so you can turn the focusing ring.

Sep 30, 2012 • Nikon Nikkor 18-55mm f/3.5-5.6G ED AF-S DX...

0helpful

1answer

My camera won't focus!

While looking through the viewfinder, turn the diopter adjustment knob just above and right of the viewfinder to adjust it until the focus marks and other information in the viewfinder become sharp to your eye.

Aug 21, 2012 • Canon EOS 550D Rebel T2i Digital Camera

0helpful

1answer

I accidently knocked over my camera with the lens attached. It is a canon rebel t1i. Now when i go to take a picture, it won't focus, unless the camera lens is all the way zoomed out. When i switch it...

The impact damage to the lens will require complete disassembly to repair. These are quite complicated but can be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

Aug 12, 2011 • Canon EF-S 18-55mm f/3.5-5.6 USN Lens

0helpful

1answer

I have Panasonic digital camera DMC-LC80. When I turn on camera, it turns off, and on display write "please turn off and on the camera again". I do it, but on display this write again and...

Mine does exactly the same - still holds all it's stored photos but seems to struggle to focus when turned on, then gives up & comes up with the 'turn camera off' message. Get the feeling it's something to do with whatever makes the camera focus.

Jul 09, 2011 • Panasonic Lumix DMC-LC80 Digital Camera

7helpful

3answers

System Error (Focus)

The systems control board has detected a problem with the auto focus lens, the focus is controlled by a tiny motor that has jammed or there is a mechanical issue with the camera lens. It will require a technician that is highly skilled to deal with the situation, but the repair cost would probably not be justified.

Jan 12, 2011 • Panasonic DMC-FX37 Digital Camera

12helpful

1answer

Camera turns on, lens cyles (in and out) 3 times, then camera displays a message "Turn the power off and on again" superimposed on the display. Image is not in focus and camera will not take picture, just...

Hi,
This is lens mechanism problem and lens assembly will be replaced to fix the issue.
Lens tries to correct its mechanical error three times then gives up and you see turn power off and on again display in lcd. If camera is under warranty, please call Sony to get it fixed or take camera to local camera repair shop if its out of warranty.
Thanks.

Jun 13, 2010 • Sony Cyber-shot DSC-W170 Digital Camera

4helpful

1answer

Power on and off

Hi there its happens when the lens not ready for work. Some how its not able to stable his focus method. That's why its happens. There is a chances of lens guide pin disturbed or damaged & thats why continues failure. Its mean he inform you there is a system error. So please visit the service center for repair that. Its a very common & repairable problem. Thanks

Apr 03, 2010 • Sony Cyber-shot DSC-W80 Digital Camera

3helpful

3answers

Focus error

The zoom and focus operate on screw thread drives. 1 of these has detatched resulting in "ZOOM ERROR" and locked the camera up. Dis-assemble lens and re-attach drive.

May 25, 2008 • Fuji FinePix S5200 / S5600 Digital Camera

0helpful

1answer

Camara doesn't take pictures

when a please turn on and off again appears there is normally a fault with or in the lens. I dont like to suggest that the camera must be opened by anyone that is not qualified to do the repairs because these cameras have components in that could be damaged and will only make the problem worse.

Jan 01, 2008 • Panasonic Lumix DMC-LZ2 Digital Camera

1helpful

2answers

It says "turn the power off and on again"..!!

try gently pulling and twisting the end of the lense and i mean gentle dont pull till it pops than switch it off and on again and you problem should be solved

Oct 26, 2007 • Sony Cyber-shot DSC-W80 Digital Camera

Question 2

Anonymous

Contributor 1 Answer
Posted on May 29, 2010

Anonymous

Contributor

Joined: May 29, 2010

Answers

1

Questions

0

Helped

929

Points

3

Had the same issue with my DMC-FZ50 for a couple weeks, and tried turning it onn and off countless times. I could hear something happening inside the lens on start-up and surmised the internal shutter was trying to open but wasn't able to. I guessed that the turn off/turn on idea was to resend the command impulse to open the shutter. So.... I t urned it on while repeatedly hitting the side of the lens firmly with the palm of my hand and.....it worked!!!!

Spencer Thomason Sep 30, 2019

Worked for me, too! Problem started happening the first time I put my newly acquired Olympus FL50 flash unit in the hot shoe. Camera and flash have worked flawlessly together ever since.

×

Related Topics:

Please turn camera off and then on again. it

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Aperture ring won't turn

My camera won't focus!

I accidently knocked over my camera with the lens attached. It is a canon rebel t1i. Now when i go to take a picture, it won't focus, unless the camera lens is all the way zoomed out. When i switch it...

I have Panasonic digital camera DMC-LC80. When I turn on camera, it turns off, and on display write "please turn off and on the camera again". I do it, but on display this write again and...

System Error (Focus)

Camera turns on, lens cyles (in and out) 3 times, then camera displays a message "Turn the power off and on again" superimposed on the display. Image is not in focus and camera will not take picture, just...

Power on and off

Focus error

Camara doesn't take pictures

It says "turn the power off and on again"..!!

Not finding what you are looking for?

Lumix DMC-FZ50K Digital Camera

Aperture ring won't turn

Ask a Question

Top Panasonic Cameras Experts

ZJ Limited

Cindy Wells

Brad Brown

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Please turn camera off and then on again. it

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Aperture ring won't turn

My camera won't focus!

I accidently knocked over my camera with the lens attached. It is a canon rebel t1i. Now when i go to take a picture, it won't focus, unless the camera lens is all the way zoomed out. When i switch it...

I have Panasonic digital camera DMC-LC80. When I turn on camera, it turns off, and on display write "please turn off and on the camera again". I do it, but on display this write again and...

System Error (Focus)

Camera turns on, lens cyles (in and out) 3 times, then camera displays a message "Turn the power off and on again" superimposed on the display. Image is not in focus and camera will not take picture, just...

Power on and off

Focus error

Camara doesn't take pictures

It says "turn the power off and on again"..!!

Not finding what you are looking for?

Lumix DMC-FZ50K Digital Camera

Aperture ring won't turn

Related Topics

Ask a Question

Popular Questions

Lens cover stuck open

Panasonic Lumix System Error (zoom)

Upon powering on the camera,

System error (o.i.s)

Panasonic Lumix DMC -FH20 lens

Top Panasonic Cameras Experts

ZJ Limited

Cindy Wells

Brad Brown

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Manuals & User Guides