At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
it was none of these suggestions it turned out to be a 5 cent piece jammed in the pump thanks for the help I will keep these ideas the next time it plays upit was none of these suggestions it turned out to be a 5 cent piece jammed in the pump thanks for the help I will keep these ideas the next time it plays up
AnonymousFeb 13, 2008
Door error alarm, then it not spinning and pumping out the water... LG..Door error alarm, then it not spinning and pumping out the water... LG..
AnonymousFeb 18, 2008
My 7.5 kg Fuzzy logic will wash, then go to rinse and pump the water out, but will not spin. Also if I want the spin cycle the machine will not do it, it will however pump the water from the drum.My 7.5 kg Fuzzy logic will wash, then go to rinse and pump the water out, but will not spin. Also if I want the spin cycle the machine will not do it, it will however pump the water from the drum.
It doesnt turn although I could hear a pulsating sound. I also tried to spin it still it doesntIt doesnt turn although I could hear a pulsating sound. I also tried to spin it still it doesnt
The machine washes and rinses fine, but often won't go into the last spin. It either says it's off side or clicks back to the rinse cycle. The cylinder seems loose towards the front of the machine, but haven't been able to find anything loose or anything jammed in the machine.The machine washes and rinses fine, but often won't go into the last spin. It either says it's off side or clicks back to the rinse cycle. The cylinder seems loose towards the front of the machine, but haven't been able to find anything loose or anything jammed in the machine.
I have the LG WF-T1022TP Fuzy Logic and had the same problem - but now all sorted out. BUT the problem I have now is it does not want to spin. After a few seconds on spin cylce it the timer will jump up and the wash cycle will start all over. Help please!I have the LG WF-T1022TP Fuzy Logic and had the same problem - but now all sorted out. BUT the problem I have now is it does not want to spin. After a few seconds on spin cylce it the timer will jump up and the wash cycle will start all over. Help please!
AnonymousFeb 11, 2009
I have LG Fuzzy logic 6.5kg WF-S6607TC, after ON pressing start..it will beb for about 10sec and won't do anything.
I have LG Fuzzy logic 6.5kg WF-S6607TC, after ON pressing start..it will beb for about 10sec and won't do anything.
My logic fuzzy 8.5kg can't function, on the display have shown "dE" .. What it's mean?My logic fuzzy 8.5kg can't function, on the display have shown "dE" .. What it's mean?
You can't post conmments that contain an email address.
Place a piece of magnetic material at the edge of the lid, for the wf-s6697tc model.
Standing in front of the washer, it is slightly off centre to the right (at the edge where the lid covers, space between the wording speedy soak & fuzzy). If you pay attention to the lid, you might notice some brownish rust stain.
This is where they place the magnet.
In the centre of front edge of lid there is a magnet, if that is missing it will beep and not work, I took a small magnet from my sons toy and attached it on the lid with a cello tape
There is no sensor around the lid. I opened up the whole top part of the machine and still couldn't find any sensors. Where exactly is it? Could anyone take a photo? Thanks a million!
You can open the lid and find the pin that hits the switch, try pushing it with a pen or something, if this works you can either replace the pin or try jamming it down with something, i have cardboard in mine to keep it switched, thinking the lid is closed. It may also be something to do with the timer, you can try advancing it slightly to engage the next wash/spin cycle.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
They are a funny little machine. The disc in the bottom is the agitator. My first thought was that you weren't locking the lid down properly, but if it spins, you are. Unfortunately, it sounds broken.
That's is how they are designed. They just tumble clothes thru minimum amount of water. That's how they are low water use and high efficiency. They rinse the same way. Then they fully spin on spin mode. So your machine is working properly as designed.
may sound crazy, but sometimes the water pump gets clogged and does not operate, so will not spin. safety feature, I guess.
Try cleaning out pump.
Bruno
Please check if the drive belt to the main motor to the agitator is slipping or is loose. It is also possible that the agitator is jammed and so could have friction so that the belt slips.
it was none of these suggestions it turned out to be a 5 cent piece jammed in the pump thanks for the help I will keep these ideas the next time it plays up
Door error alarm, then it not spinning and pumping out the water... LG..
My 7.5 kg Fuzzy logic will wash, then go to rinse and pump the water out, but will not spin. Also if I want the spin cycle the machine will not do it, it will however pump the water from the drum.
It doesnt turn although I could hear a pulsating sound. I also tried to spin it still it doesnt
The machine washes and rinses fine, but often won't go into the last spin. It either says it's off side or clicks back to the rinse cycle. The cylinder seems loose towards the front of the machine, but haven't been able to find anything loose or anything jammed in the machine.
de code shown
I have the LG WF-T1022TP Fuzy Logic and had the same problem - but now all sorted out. BUT the problem I have now is it does not want to spin. After a few seconds on spin cylce it the timer will jump up and the wash cycle will start all over. Help please!
I have LG Fuzzy logic 6.5kg WF-S6607TC, after ON pressing start..it will beb for about 10sec and won't do anything.
My logic fuzzy 8.5kg can't function, on the display have shown "dE" .. What it's mean?
×