Where can I downlaod the HP Director for HP scanjet 5590

check Pack up roller and clean it , then try again

Did you solve this problem. I need to solve too.

HP SCANJET 5590 ERROR "failed to create empty document"

I had the same problem and solved it. I was using HP Solution Centre to run my HP Scanjet 5590 on Windows 7 Pro 64 bit without problems. Then I ran the scanner using Windows Fax and Scan, but didn't like it, so went back to HP Solution Centre - whereupon the scanner was not recognised.
After hours of reinstalling software etc etc, without success, I suddenly noticed four device icons on the left hand side of HP Solution Centre. These were labelled (when hovered over with the mouse) hp scanjet 5590, hp scanjet 5590 #2, hp scanjet 5590 #3, hp scanjet 5590 #4. Only the top icon was active, but when I clicked on any of the four it moved to the top.
Clicking on hp scanjet 5590 #2 gave me a working installation once more - problem solved. No doubt the multiple icons arose from my desperate attempts to try different USB ports.

You can get a service manual at this website address (HP website):

http://h10061.www1.hp.com/ccsearch/search?pname=HP+Scanjet+Scanner&qry=instruction+manual&submit.x=7&submit.y=4&ctry=emea_africa&lc=en&dlc=en&mode=fb&tmv=0&method=prodFinder&pid=&productBigSeriesOid=&spid=&opname=&pname_desc=&ptype=&stype=&contextual_lname=&spname=&temp_hql=&search=0

How to share scanjet 5590 with other's pc.

thsi is it

It may happen if you have version 7.0 of Internet Explorer. 
Install the below patch on your system it will make the HP Director to work.
http://h30318.www3.hp.com/pub/softlib/software8/COL17377/oj-46104-1/CIT207355-HPCOM-PATCH-v8.exe


I hope it will work.

cannot possible to install in vista using the CD of scanjet 5590

uninstall and remove all the icons from your PC first than reinstall the driver from CD and run complete setup it works.