How do I unlock my Sony DVP - NS330 player, bought
Codes for-
Sony DVP-NS300, Sony DVP-NS305, Sony DVP-NS400D, Sony DVP-NS700, Sony DVP-S330, Sony DVP-S335, Sony DVP-S360, Sony DVP-S336, Sony DVP-S525D, Sony DVP-S530D, Sony DVP-S535D, Sony DVP-S536D, Sony DVP-S725D, Sony DVP-S735D
Turn on the unit with the remote controller, Wait until "no disc" appears in the unit's display. Press the keys: PAUSE, 3, 1, 4, 1, 5, 9. And "CODE" will appear in the display. Press the number key that corresponds to the disc zone you want to play within the next 5 seconds:0: All regions / 1: Region#1 / 2: R#2/... and so on. Then, within 5 seconds, press: PAUSE, POWER... and voilà. If you don't have good results, disconnect the equipment and repeat.
Or
Put your player in standby mode and then enter: [[0] [ENTER] Default Default region code [1] [ENTER] or [UP] [ENTER] Region 1 [2] [ENTER] or [RIGHT] [ENTER] Region 2 [3] [ENTER] or [DOWN] [ENTER] Region 3 [4] [ENTER] or [LEFT] [ENTER] Region 4 [5] [ENTER] or [TITLE] [ENTER] Region 5 [6] [ENTER] or [DVDMENU] [ENTER] Region 6 [7] [ENTER] or [RETURN] [ENTER] Region 7 [8] [ENTER] or [DISPLAY] [ENTER] Region 8
Or
Put player into standby modes by pressing power button on remote control. Then press Title button. Press Clear button. Press Power button.
Yours is not listed but these may be worth a go.
or try http://www.haldigital.com/hp/dvd.htm
I live in australia and recently bought a dvd from the USA. When the picture plays it is very grainy and in black and white. Waht can i do?
I'm having same problem with Sony DVP-DS57P and getting same error while playing any DVD. Please help me to unlock its code. How should I make my DVD player region free ?
my id : [email protected]
Thanks in advance...
Bill
i have the same problem of not playing DVD disks "Cannot play due to area limitations"
what could be the solution to this issue?
Hello to all. I have the same problem with my player. I bought him in Brazil with a code for region 4 in. I found the fallow link to resolve this problem. From me it was not sucessful mabye for you . Good luck
With a disc on it and standby, I tried the Top Menu/Clear/Power, Option 2, Option 4, Input Count: 12450, Current Count 00000, I saw the 0 (apparently is region free now but not sure) in the display but the tray started to open and close permanently, so I had to unplugged the device from AC. I didnt try if now it´s region free but ASAP I will, and post the results.
DVD player will not stay on
×