I want to bring a Symbol MC3090 into WIFI - Symbol MC3090 Mobile Computer

I am assuming you meant Motorolla MC3090 mobile comupter running Windows CE.

MC3000 User Guide - Motorola MC3090G Win CE 5 0 Core User Manual

On 28, 38 and 48-key keypad configurations, press the Power button to turn on the mobile computer. On 20-key
keypad configurations, simultaneously press the Fn and MENU buttons to turn on the mobile computer. If the
mobile computer does not power on, perform a cold boot. See Resetting the Mobile Computer on page 2-28.
When the mobile computer is powered on for the first time, it initializes. The Splash screen appears for a short
period of time, followed by the Calibration screen

what are you trying to change it from and to? Whats the full p/n from the back on the device so i can check its capability please.

You would need to install and run an scanning application. On the suppor.symbol.com webpage is the application Datawedge available.

I've got your answer!

Free troubleshoot, contact Lexicon Technologies.
Call: 1-800-678-1744
Email: [email protected]
Web: www.lexicontech.com

open this link and download driver and software
after that connect
http://www.mbcestore.com/symbol/mc3090-software.htm

press and hold 1 & 9 ,then press power.

Have to go to Fusion > WCConfigure> Options > Regulatory > uncheck ENABLE 802.11d,

I assume that Fusion is installed on all MC3090's but if not, you are looking for the wireless configuration options.

u buy cradle for mc3090 .... it is so simple... u r boss may getting mess up with you

Yes, this is possible. You could use the ADF rules in the scanning application called DataWedge. This application is available at support.symbol.com