I used a hairdryer to thaw the waterline on my GE GSL25JFTABS refrigerator and the plastic melted and warped. Because of this I've had to purchase a new funnel ice dispenser. A spring (funnel spring) fell off before I could see where it went and I can't locate where it went. I don't see any guides online to show where the spring goes on the funnel. Any suggestions?
SOURCE: GE side by side refrigerator ice dispenser
If you take a look at this diagram, you should be able to see all the inner workings of that area and decide if you want to repair it. I think anyone with the most basic mechanical skills could easily handle this repair. See parts 62,63,67, etc. Could just be the spring is off or broken. Let us know what you find! http://www.partselect.com/Schematics/GE/00112435i01.gif
SOURCE: GE profile performance tfx30ppz ice dispenser not working
Had the same problem. The water line from the valve to the ice maker was cracked due to heat from the compressor.
SOURCE: I hooked up my refrigerator and my ice maker to
i had the same problem one time and there was something obstructing the fan under my frig and i blew thru it to icemaker with compressed air and it started working
SOURCE: I have a GE refrigerator whose white funnel
Just pop the old one out , and snap the new one in place .
SOURCE: frost buildup inside freezer door at ice dispenser
you are still not getting a seal on that flap. It sounds as if it may be warped. THe reason the frost and ice is building up is due to the flap not sealing there isn't any other reson for your problem. Good luck on your repairs
Dave
108 views
Usually answered in minutes!
×