Indesit W 123 Front Load Washer Logo

Related Topics:

Posted on Feb 09, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

W123 dispenser drawer keep melting

Hi
I have had my Indesit W123 for about 5 years now, and have had no bother with it up until now. On a 90 hot wash the front of the dispenser drawer melts and is now warped..... surely a machine that is designed to do 90 washes should be able to withstand the temperature of this wash.
What can i do? Or where can i get a new dispenser drawer from that is reasonably priced?
Thanks
Michala

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Expert 417 Answers
  • Posted on Feb 10, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Dec 26, 2007
Answers
417
Questions
0
Helped
362261
Points
739

Hi there you can order the part from indesit and should not cost alot and yes it should withstand the temp check that if you are using the hot tap to the machine turn down the water thermostat as maybe too hot.

Thanks J

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Indesit IDL 850 dishwasher: dishes in the top drawer ONLY are dirty: residues is left on and inside what is in the top drawer, so that they come out dirtier than when they went in. This is new: I have not...

If he Dishes Are Not Clean:

- Have you put the right amount of detergent into the dispenser?

- Is the wash cycle suitable for the dishes you have placed inside the
appliance?
- Are the filter and microfilter clean?

- Can the sprayer arms turn freely?

This is how the manual helps.
0helpful
1answer

Leaking washing machine

Disconnect first the mains, power plug off the wall. You could have a clog in your soap drawer; pull the dispenser drawer completely out. There is a tab that needs to be depressed to release the drawer to remove. Clean the soap drawer with an old tooth brush. The usual block could be old soap, softener, etc. (you could also be using too much soap powder). I usually use just above 125ml (my measure cup says ml, I use front loader powder for the 5.5kg load) The wash is very gud. This is the normal issue that will cause water to leak out of the dispenser housing.


Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Next could be one of hoses has become loose, should be re-fixed. Examine by removing top of the front loader; this will give you a gud view of the pipes.


If helped, click.
0helpful
1answer

Indesit w123. motor burnt out?

If your seeing flashes from behind the dial I'm thinking that the timer needs to be changed. Even with the motor shorted out, it still wouldn't cause that effect to happen.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

0helpful
1answer

Indesit wd10 water pouring out from powder compartment what is most likely cause?

Blocked siphon tube from conditioner segment or blocked hose from dispenser to drum. Pull dispenser drawer out and clean in the hole where it comes out from. Then regularly do a hot wash without using any detergent or conditioner
0helpful
1answer

The fabric softener compartment of the detergent drawer is not emptying. The machine is an Indesit W123.


I have had my machine for the past 6 years, I do on average ten loads per week, and it has never failed me. A bit noisy but for the price I could n`t complain. I have just broken the door handle which has cost me a total of #8.50. Not bad for six years hard labour
2helpful
1answer

Water in softener compartment Indesit w101 (not above)

Go to Indesit web site download user guide
http://www.indesitservice.co.uk/hs/pages/manual/manualSearch.do

Most soap drawers have a plastic latch which needs to be pressed to release it.

You will find that there is a ball of soap congealed in the back of the dispenser drawer
0helpful
1answer

Replace door rubber W123

how do I replace the door rubber on Indesit W123
0helpful
1answer

Indesit washer w123

take soap drawer out and clean it
0helpful
1answer

Dispenser issues

pull drawer out towards you, untill it comes to a stop.!push down plastic tab and pull the rest of the way out,some dispensers have to be lifted and pulled at the same time.wash it then with hot water! take apart softener compartment to clean,makeing sure small hole is free!!!close eire
1helpful
1answer

Indesit w123

the holes above the drawer may be blocked. remove the drawer and scrub the holes with a stiff washing up brush rinse away then try again.
Not finding what you are looking for?

284 views

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...