Kyocera c5200 cant print color , gives the following error codes. PCL XL Error Subsystem: KERNEL Error : ColorSpaceMismatch Operator : SetBrushSource Position 16

Hello,

You can try to reinstal the printer driver. PCL is a printer language.

try a different driver
pc5
pcl 6
and kyocera own kpdl or kx
or even a mini driver
here is the link http://www.kyocerasupport.co.uk/index/download_center.false.driver.FS1030D._.EN.html
if all fails u might need to upgrade firmware on the printer

I already answered this, but the response did not get posted.

The short answer is that the PCL XL interpreter has picked up the use of the "Escape Code" (0x1B) in the incoming datastream. This command is used for the standard versions of PCL, most notable PCL 5e. It is not used in the PCL XL datastream.

Don

some files may be corrupt: Best is try to reinstall printer software with original drivers to ensure that correct files are installed.

Hi,

Please uninstall the current PCL driver and upgrade the same with UPD PCL5 (dont install PCL6) from http://www.hp.com/go/upd

Regards,
Nikhil

try to go to property then setting device button PDL and try to put pcl 5e

It is a driver error, try another printer driver version or use PCL 5 rather then PCL 6 driver,

Check your USB cable it must be HighSpeed or USB 2 cable.

when i send for print i et
PCL XL error
subsystem: KERNEL
Error: IllegalTag
Operator: 0x1b
Posittion: 7

Dear Sir

My printer is laserjet 1320

PCL XL error
Subsystem: KERNEL
Error: Illegal Tag
Operator: 0x1b
Position: 6




Pls. This problem solution give me.

When I try to print from an access data base to the laserjet color 3500 usb printer.
Tried diff. drivers, diff usb cable, it works for a while but after several test runs the error reapears.

PCL XL error
Subsystem: KERNEL
Error: ColorSpaceMismatch
Operator: VendorUnique
Position: 9