Hi I too am having problems with my Quinnys front wheel, tried cleaning it didn't work so I'm looking into purchasing the two wheels to convert into a four wheeler. Question: Where can I purchase it in the US that isnt EBay (specifically NYC)? Thanks.

Try checking the module on the transmission for a dirty plug and clean all are you getting any codes to? Also check the drivers side wheel and bearings ?the 4x4 trucks are chain driven so I think your problem is that wheel it could be the bearings are shot and it's pulling not the 4x4 unit but see if there's play in that wheel if so it's a mechanical problem not electrical ok post back again with progress stephen

Hi.

You can purchase the wheel here. If you do not live in UK call them to arrange overseas delivery, the part distributors ships worldwide.

Depending on the color the wheel is p.n. AP8108821 or p.n. AP8108965 . You can find more sellers using the part number in Google.

Below also the part diagram. The wheel is part nr.4:



Regards.

Ginko

I have the same problem few days ago, and still didn't find any solution. Can any one please help?????12

Maybe try the wagon wheel..seriousily they look the same to me and sometimes if the part fits it will work just as well as if you bought the actual part. Most of the time they are the EXACT same piece but, the company won't tell you that, maybe if you look at the replacement part section and see which one looks closest just a thought!

hey try to add grease or oil in the joins of wheels it doing that due to fiction.good lucky any greet that baby angel 4 me.

check for cracks in the ring that the sensor reads off of... for the life of me i can't think of the proper name at the moment

Robert

I took mine to a bike shope they put wider washers in - silent now

The traction control works in tandom with the ABS system. You have two ABS sensors...one on the front right wheel and one on the front left. You'll have to take the wheels off to get to them. Once the wheels are off, look in the back side of the wheel bearings and you will see a ring with teeth like protrusions... kinda like "little Gears". If you are not sure where to look just follow the CV axles from the transaxle to the spindles. They are located on the ends of the cv axles. If you notice and debris or grease on the gears then clean it off with some brakes clean. Also check the wires leading to the wheel speed sensors (aka abs sensors). be sure they are intact. The rings may be built into the wheel bearings themselves and if that is the case, you will have to replace the wheel bearings. There could also be a problem with the body control module. It would help alot to get it scanned if you feel you may have to replace something. No sense in shooting in the dark try to replace parts that don't need replacing. Hope this helps.

So sorry for your luck unfortunately in the business we refer to them as Ford Exploders

it could be the vehicle speed sensor is bad