Ricoh Aficio 1013 All-In-One Laser Printer Logo
Posted on Jan 15, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Even though my RICOH Aficio 1013 appears to be an ALL-IN-ONE, the ONLY function it now porforms that of a copier. What components do I need to add or install to get to function as a printer, scanner, & fax?

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 1,110 Answers
  • Posted on Jan 15, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Oct 17, 2009
Answers
1110
Questions
1
Helped
544598
Points
4088

It would be cheaper to find a 1013spf meaning scan,print,fax. Finding all of the boards, wiring harness, ROM chips and control panel buttons needed to convert your machine would be pricy. Then you would need a service tech to install everything as well. You can find the "spf" versions used for less than $1,000 and you could get around $500 for yours.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a problem in my ricoh aficio 1013, there is no prints on the paper coming out

try to check if the cam gear is still there,you can found it at the rear side of the pcu assy.
2helpful
1answer

My machine aficio 2045e give error toner signal even though toner in bottle is more than50% i make every thing but still appear add toner

Inside the toner feed mechanism there is little plastic fins that tend to break off. You will probably have to replace the hopper unit (The unit that the toner tube sits in) or in that unit where the tube opening sites you can either replace the feed chuck or if your handy maybe repair the feed fins. The chuck part pops out with plastic tabs.
3helpful
1answer

Ricoh Aficio 1013 error code sc 544

Fusing low temperature error

Symptom: Detected fusing temperature
remained abnormally low for 1
second during fusing operation
(below 140°C) or during standby
mode

Possible Cause: Fusing thermistor defective
• PSU defective
• Bad connection between fuser and
machine
0helpful
1answer

Ricoh Aficio 1232C rpcs When I try to print the red light appears on the printer saying 'load by pass tray' even though I have selected Auto tray. Normally the machine prints fine.

when you selected auto tray was that in the driver or microsoft settings ? microsoft settings will overide the copier settings driver. look under file then page setup to see what it is set for.
0helpful
1answer

Photocopy is grey and duplicating previous sheet

sound like it needs a service,u need to clean the optics and scrape the hot roller, engineer needs to do that though
0helpful
1answer

I have a Ricoh Aficio 1013 copier that has started to have an area of "ghost" printing in a narrow strip about 2" wide and 4" long on the lower left side of the copies that are being made. It appears to be...

Open the right door is there an image on the drum? (if not) It sounds though that your fuser has toner build up on it and is at end of life. These fusers are harder than most to rebuild so maybe a service call? -Carl
12helpful
2answers

Error SC320 Ricoh Copier

Change the polygonal motor of the laser.
0helpful
1answer

Am having ricoh 1013 photocopier, and its giving an error message that "functional error,switch off mainpower and on"!

Low fusing temperature. Either the thermistor is bad or power supply board (unlikely). Service code can only be reset in service mode by a technician after problem is fixed
10helpful
4answers

Ricoh photocopier 1075 code sc541

Ok, its a firmware bug, but you should be able to reset it. Press clear modes, 1, 0, 7, and press and hold clear/stop. Press 1 for copy sp. Scroll down to 7, (data log) press 7. scroll to 7807, and reset it. exit all the way out, and recycle the power.
Not finding what you are looking for?

149 views

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...