I WANT TO LEARN INSTALLING EVEY ONE

Hi there my name is Brandon Im a electronic n mechanical engineering technician Im not a regular mechanic I fix what regular mechanic cant or don't know what is wrong but I will be more than happy to help you out I need more information to help better I will check out coils,coil ground, plug wires, plugs also do a field test for the coil take a test light and ground it to the cars body and with it running put the t-light new to the wire but make sure you don't pull the plug wire and then put the t-light if you do you will get shocked like crazy so make sure you put the light below the wire n on the top of the coil. N with it running n the test light in the right place pull the plug wire it will shock the light thats is good now rise the light up you should be able to see the Ark go up any were between 6-12 in on Evey one of the plugs and don't pull the t- light off you use the light so you don't get shocked n to see the Ark test Evey one of them from the coil the same way n if you cant get the Ark test to go 6-12in on Evey one Evey time then you have a weak coil if it is you need a new one n also I wound change your plugs and wires to but be sure you take a pics of the firing order so you don't mix it up I am a 6 generation technician and I grow up watching my dad and grandpa do it like that drawing the order step by step n I still to this day I do it like that but if you need anything email me is at the bottom of the page




God bless you,
thank you
Your engineering technician
Brandon
my email address is
([email protected] ).
If you need anything or if you have any questions about anything!!! Also be sure you have all the information like year, make, model, motor and what the problem is n take pics, video if you can, I help with 500-1500 email a day!!! so the more information I get better n faster I can help you I also running my shop too so I will get back to you A.S.A.P I try to check it Evey hour
P.S. you can ask me anything testing etc..... I have been ask a lot of crazy thingsjsince I have been helping people all those years B-)

How to Replace an Upper Control Arm - YouTube

? 15:18
https://www.youtube.com/watch?v=wZGr8Xf2ip8
Oct 10, 2014 - Uploaded by ChrisFix
Learn how to replace the Upper Control Arm on a Chevy Trailblazer, GMC ... can you do a video on how to ...

Installing Rubber bushing on lower arm for trailblazer ...

? 0:53
https://www.youtube.com/watch?v=KYIPc_ZXMJo
Jul 27, 2013 - Uploaded by Abdul Hameed
Installing Rubber bushing on lower arm for trailblazer ... How ToChange Control Arm Bushings Using A ...

it sounds as if you are using a shop, the items are icons which you can download and install, you have to wait for finished installing box to come up. A flashing down arrow shows it is being downloaded at the top of the screen.

Refrigerators are sealed systems, most have no ports to recover refrigerant or perform service. The problem could be several things, the only really repairable problem could be the fan (if there is one) but most likely the problem is from either: the superheat metering device; the charge (amount of refrigerant present in the system) is low, indicating a leak; or the compressor is failing. It is probably more cost effective to replace the refrigerator rather than to repair it, especially if it is a standard residential type

wendy425,

All Pro heaters and Reddy Heaters are the same.

This is a classic reddy heater problem. They use the bleed air to determine the pump pressure and ultimately the mix of the air/fuel. Once the filter gets dirty the relationship changes and the unit gets too much fuel. The solution is to get a new filter and the pressure gauge necessary to set the pressure after installing the new filter.

I have a tip at http://www.fixya.com/support/r4124129-yearly_maintenance_reddy_heaters which explains the problem, where to get the parts and how to complete the repair.

Thanks for using FixYa and the generous rating.

hardrocko

I have the same problem. Pls help! Thanks!

you could check here for more inputs and issues discussed which helps you...

http://support.selectsoft.com/products/L/LLLEAEN81J.htm

No calibration...unlike some sending units that send a variable signal and have a "range" that a computer needs to "learn" the cps sends a fixed signal that is either there or not there.

If you have Vista try to right click the install file and select "Run as Administrator" and see if it works..

Check Wood Burner Basics