DVD JVC XV-N380B DO OU KNOW THE CODE TO MAKE THIS

If you suffer from region code troubles, you can download a region free DVD player software tool on your pc and then you can play discs of any regions you want. You can try Leawo Blu-ray Player which is a free Blu-ray player and a region free player.

Ring JVC for multi region code. have model number ready.

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_56yt

Another user at this site had some success using the following procedure to unlock their XV-n670 DVD player: (the code is actually for model JVC XV-N652)

Open tray

Press 0 three times

Brings up a menu

Press 0 for multi region

Press Enter

Press Pause to exit.

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_cb7y6

Hi there, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_4ft6

Try this link: http://www.videohelp.com/dvdhacks/jvc-xv-n322s/5424#30023
1. When "REGION CODE ERROR" shows on screen after you've input your wrong-region DVD you push "ON SCREEN".

2. When the DVD-menu is showing push "ON SCREEN" again and another DVD-menu will appear.

3. Move the arrow over to the clock and press enter. The menu asks for "TIME" and you write 0:00:00 and push enter.

4. You will now see the menu for the movie. Remove the DVD-menu by pushing "ON SCREEN" once. You can now watch the movie.


(Tested and Worked!)


Report this hack (requests/questions/spam/wrong/****).-->
Region code hack posted by Alex2000, October 31 2009:
Your hack is GREAT!
Works fine on the JVC XV-N342 too.
And right for JVC on the ESS chip:
JVC XV-N320, XV-N322, XV-N330, XV-N332, XV-N340, XV-N342
and so on.
Thanks!

try this one, its not the exact model number but its close enough.

Open tray
Press 0 three times
Brings up a menu
Press 0 for the multi region
Press ENTER
Press PAUSE to exit.

hope this helps

Little Dish Fitter

Below is the only known process to unlock that model of DVD player. Does not work on 100% of dvd players.

1. Turn on dvd player
2. Open the tray
3. Press 0000 in the Remote Controller
4. Change to any region you want (0 for region free)
5. Press Pause to confirm your change
6. Turn off
7. Turn on again and enjoy

Hope this works for yours, please post back if it does. Thank you for trying Fixya!

Hi!
I would like to ask it,that jvc xv n 316 dvd to a player this firmware is refreshing.