I purchased a Silicon Scientific radio controlled (''atomic'') wristwatch from Heartland America. I want to use it again but misplaced the instructions. For some reason the radio control is off and I'd like to get it going again. Would anyone know how to do that, or have the instructions for this watch?
SOURCE: Need an instruction sheet for the silicon scientific atomic digit
Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals. Rate me, please . .
SOURCE: silicon scientific atomic projection clock did no ...
I have one of these, and look for the manual on the 'Net every time DST changes, and eventually figure it out. Here's how: (1) Hold down the ALM/SET button until you get past the alarm setting and you see 24H or 12H. (2) Step through the settings by pushing the ALM/SET button, changing each as desired by pressing the +/CYCLE button. Eventually you'll wind up with the time zone indication flashing (it's really tiny, and appears just below the time indication). Press the +/CYCLE until you get to the desired time zone. (3) After the screen quits flashing, press the -/DST button to get the desired setting. I hope this helps, and that I can find this post again next time change!
317 views
Usually answered in minutes!
×