Can''t seem to thread this serger the green knob is where the problem is
have done this tseveral time
My lower looper thread keep breaking, what is the problem.
SOURCE: my white speedylock serger 1634 thread keeps getting in knots
i have the book and it says thread from inside out, inside looper (upper) then lower, then thread the needles, first right then left. I have found that it does not matter if you thread the needles or loopers first but that you should try to thread from inside to out.
SOURCE: Baby Lock Serger Thread keeps breaking
Mmmm...., maybe NOT the solution, maybe, just a key.
I have a copy of theBaby LKock EA-605 instruction booklet in English, Germann, French and Spanish. NO ideas how it casme into my orbit, but happy to pass it on.
SOURCE: threading brother 1034D
on u tube the show you step by step how to thread the Brother 1034d.
SOURCE: I need an Elna Pro 5 DC serger machine Owner's Manual
The original manual is out of print and all that is available now is photocopies and they cost about $15. Let me know if you still need it and your zip code so that I would know how much postage would be.
For Elna 654 overlock Machines
Elna 654 Serger How to thread for 4 thread overlock tips tricks 
1,481 views
Usually answered in minutes!
After threading, the threads dont lock. I thread it according to the diagram in the machine.Sara
Make sure you are threading it correctly. Typically it's from right to left.... or lower looper, upper looper, right needle, left needle. Barring that look carefully at the loopers for burs. If you find any use some fine sand paper and carefully file them away.
×