Loud clanking noise during spin cycle. Will not spin during the whole final spin cycle and clothes are wet.
If it is a front loader, then remove the rear panel, remove the belt, and soin drum by hand, if it feels rough, or is noisy and rumbling, then the main drum bearings have failed.
This is a major repair.
Some of the support items for the drum (springs / shocks) may have worn out have partially failed. Front loaders usually have both items with springs on top and shocks on bottom.Open access panels front and top, check for worn/missing/broken springs and shocks that might be leaking fluid. Replace as needed.
1,330 views
Usually answered in minutes!
×