Hi cathie
If you have sound it means that the tv is in aux/video mode.
Now make sure that the video output of the vcr is connected to the same aux/video input that has the sound connected to. i.e input 1 or 2 .
Also you want to try and switch with another cable to make sure that the cable you are using now is o.k.
Another way to try the tv input would be to connect something else in that input(cable box ,dvd ,video game etc,)
Try it and let me know.
Hi again
O.k the cables to the tv are connected right.
What you need to look for now a the back of your dvd is video/audio out.
What you are attempting to connect right now is components out and what you need is composite.
Leave the audio out where they are and try the different video connectors that you will see
What i was saying is that the red and white cables go from the audio out to tv in.
Then the yellow cable goes from video out to the tv video/aux in.
Can you give me the model number and brand name of the unit you want to connect to the tv ?
O.k i can see the connections available at the back of your dvd/vcr combo.
Look at the back of the unit and there will be a row of connectors under dvd/vcr.
The first two are "audio out" L/R and you connect the white and red cables to it .
The one below those two is "video out" , connect the yellow cable to it.
Now do the same to the tv input/aux
did you get my last comment?
I could send you the user manual with the connections indicated if you wish
Leave me your email and i will send you the manual with explanations
Hi cathie
I was just reading your comments where you said that"all i`m getting is a bunch of x`s and lines" and it made me think that perhaps now the problem isn`t with the wiring.
Have you tried to playback a vhs tape?
Do you get the dvd on screen menu?
By the way ;
Did you get the user`s manual that i send you?
Hi cathie
Do you have another unit(vcr,dvd.cable box, video game)that you could connect to your tv video input?
Or do you have another tv that you could use to verify that your magnavox is working correctly?
At this point there seems to be one of your units , either the tv or your dvd/vcr that is malfunctioning.
Hi again cathie
Well , now we know that the video input on your tv is the problem.
One other way to connect your magnavox would be to get a rf converter.
Here is an example;
http://www.walmart.com/ip/Philips-Audio-...
With this type of unit you could have your magnavox and tv working.
If you do opt for that solution, let me know and i`ll help you with the setup.
O.k cathie
Let me know when you have something new.
P.S I noticed that my solution was in the # 2 position , could you revert it to # 1 , so we could communicate in the future?
×
An input is an input, that is to say the normal video inputs are these:
Yellow video input marked "AV" (Good picture)
S Video input (Very good picture)
Progressive or component video input (Also Very good picture)
HDMI video input ( HD video quality and the best there is).
you can use any of these based on what types of video ouputs your different players have such as DVD, DVR, VCR, Bluray and so on.
most likely the remote is defective
this is wrong
the componant video out is green beside it is a y below that is a blue one and beside it is a c b and below that is a red one and beside it is a c r. all comes under video out. we have red yellow and whit e hookups, and those three wires are connected to tv aux. then a/v imput. also on tv yellow is in the video red is the right /left mono.
×
Here is the link to the user manual which explains how to do the code search:
http://157.254.235.130/public/IBRCR311BREVA.pdf
319 views
Usually answered in minutes!
we want to know why it is not switching over tothe aux. a/v input on vcr.
we get sound and no video picture
the componant video out is green beside it is a y below that is a blue one and beside it is a c b and below that is a red one and beside it is a c r. all comes under video out. we have red yellow and whit e hookups, and those three wires are connected to tv aux. then a/v imput. also on tv yellow is in the video red is the right /left mono.
we don't understand what you are saying. can you give a diagram, also what connectersto where
magnavox dv220mw9
we tryed and we are not geting anything.it would be good to get the manual. all we get is x's and lines
ok thank you for your time [email protected]
yes i did thank you but come to find out we have the manual . but we still can't get a picture when playing a video. can you help?
we had the neighbor bring his unit over which is the same magnavox unit that we have and his is working on his tv fine but will not work on ours.
thank you for that information. if we do purchase it i will be in touch. right now it isnot avileable to purchase.
yes and i as would like barbu 51 to remain my expert number #1
×