Panasonic Lumix - LCD & viewfinder WHITE

lumix dmc-fz30 lcd white screen

There is most likely a setting in the camera's menus so that you can switch between live view and the eyepiece. Search around, or check your manual.

Hi Joan,

this behavior is not normal. I suggest you take it to service. I doubt there is everything ok with it. I own a service manual for my FZ 50, there is nothing like that described. Have it fixed before it dies completely.

There's a small dial on the left side of the viewfinder (next to the flash button) that allows you to focus the viewfinder. I only found it because I had the same problem - must have knocked it out of focus by accident!

No, there is nothing like that. If you need advice, ask me, I will try to help you with the settings. [email protected]

Is the battery dead? Try taking it out and charging it, then put it back into the camera.

Also, you can try using another battery of the same type.

you go to menu,then go to Color settings Black and white

Hi,

Normally there are two reasons for the given problem.

1). Bad or defective CCD. and/or

2). shutter not working.

in the first case the only solution is the replacement of the CCD.
Please click HERE

And in the later case sticking of shutter blade, non functioning of shutter blade will cause the problem. This can be rectified by sending it to some repairer.

Click HERE for the manual.

Main support number: 800-755-3854

I hope you are satisfied with my solution..

Goodluck..

You may want to ask a guy in South Carolina that has all the used parts for your TZ3. I think his email is [email protected]

CAN YOU SEND EXAMPLE PICTURES, OR DESCRIBE THE FAULT IN DETAIL.