Printing data stop's on middle what was the problem on printer Epson LQ-1050 Matrix Printer
I am getting my text cut off at the bottom what could be the problem
If you have a program that indicates the following when in the process of pulling a report:
"Press any key to pause/stop"
Then it may be that a key was touched while you were printing.
This is the case with our current billing program.
Monique
787 views
Usually answered in minutes!
Printer temporary stop, and continue after +/- 10 second.
printing data getting cross like (left to right) what was the problem on printer Epson LQ-1050+ matrix printer, how to rectify this problem.
i am getting print in focus dos mode printer ok , but while taking tally document it was gouing cross like from left to right, what was the problem on printer Epson LQ-1050+ matrix printer, how to rectify this problem.
i am getting print in focus dos mode printer ok , but while taking tally document it was gouing cross like from left to right, what was the problem on printer Epson LQ-1050+ matrix printer, how to rectify this problem.
but last time i got nice printing in tally & excell. but now i am not getting print in focus dos mode, printer ok , but while taking tally document it was gouing cross like from left to right, what was the problem on printer Epson LQ-1050+ matrix printer, how to rectify this problem.
EPSON LQ 1150 printing problem.paper does'nt sense on the right side n it is not printing on left side if we set the paper
Cannot print through network
While printing its prints on the right side pls tel me the solution
printing beeps continuously stops and starts
downoad automatically setup driver
epson lq 680 prints condensed characters
×