Pen Status window stalled during installation.

try some formating toos .. like hiran boot cd or disk or diskformater ...u can use usb bootable device to install windows, u can make ur personal pen drive to bootable pen drive.

Photo impact pro as a software has compatibility requirements. For example, impact pro was invented during the times of windows Xp operating systems with Microsoft computers. Imply that, impact pro would hardly function with apple Mac computers. Since the Xp operating systems, computers have gone through design fronts of Windows Vista 1 & 2, and recently displaying Windows 7 on those acquired on the market over years ago. The most recent multimedia photo editor software's acquirable on the retail market have compartibilies with more recent computers. Alternately, performing a computer alteration may achieve installation capabilities. First, finding a computer still functioning on windows XP, millennium, 2000 or 1998 would make installation possible. However, sustain wearsomeness since windows 98 earlier years computers were least designed for multimedia capabilities as known with Photo Impact Pro 8.5. Second, a possibility of acquiring Windows Xp disk software on the retail market to replace the one on the computer would make impact pro installable. However like known of operating system software's, it is only possible to install the same operating system on an existing one on a computer as restoration purposes. If different software should be acquired like XP requesting installation on windows Vista or Windows 7, the entire hard disk drive has to be erased of media traces of the prior. Alerternately, a new operating system may be installed if only a new hard drive, memory cards were acquired to replace the prior on the computer to make possible installation of Photo Impact pro 8.5

grab the Graphire 4 driver it supports the Graphire Blutooth

Try to reinstall your driver. Download it from here: driverupdate us This tool usually keep my drivers up to date (perfectly for now) take a look

you may have installed the driver for windows xp or a later version then windows 7, you will have to make sure you install the correct driver for you OS

find tha right driver of tablet for win7 version. Search for windows7 drivers for ur tablet try this http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Wacom%20Graphire4%206X8%20Silver%20Tablet&v=Wacom&uid=CTE640S&pf=3π=8&c=Mice,%20Keyboards%20%26%20Input%20Devices&sc=Other%20Input%20Devices&os=32-bit

http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Wacom%20Graphire4%204x5%20Blue%20Tablet&v=Wacom&uid=CTE440B&pf=3π=8&c=Mice,%20Keyboards%20%26%20Input%20Devices&sc=Other%20Input%20Devices&os=32-bit

Ok so I called costumer service because mine was doing the same thing. Apparently the pressure sensor in the pen is stuck down. What you do is remove the pen tip with tweezers, blow in the open end of pen, then tap the pen (open end down) in a table to get any debris out of there. Then just put the tip back in and give it a try. That did the trick for me. Hope this helps.

make sure that the driver you installed is the correct driver for your computer operating system. you may have windows 7 but the driver is for windows xp

Download the latest driver of you tablet. Wacom updates the tablet drivers every now and then.

just pull the pen nibs right out with a pair of tweezers or pliers… Its just a piece of plastic - look at it. You might even find a substitute in your own home