The Main Tuner Signal board also dead.Replaced that board too.Rare but it happen some time,power short circuit the Main Tuner Signal board too. The Main Tuner Signal board also dead.Replaced that board too.Rare but it happen some time,power short circuit the Main Tuner Signal board too.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
All
error codes start with the letter "E". An error code of E11 will have
the five indicator lights flash once and the Start indicator light
flash once.
Some
models of Frigidaire washers come with a digital readout display that
informs the operator of the unit's function and any errors.
Error codes
indicate that a problem has occurred and should be addressed. Different
models of Frigidaire washers may vary in their fault displays.
Some
washer models use flashing lights at the unit's start, door lock, wash,
rinse, final spin and control indicators to display error codes.
If
the five indica
tor lights flash more than nine times, this signals a
letter in the error code. The letter "A" stands for 10 flashes, "B" for
11, "C" for 12, "D" for 13, "E" for 14 and "F" for 15 flashes. An error
code of EB2 will have the five indicator lights flash or blink 11
times, and the Start indicator light blink twice
Two blinks - B+ over current protection (OCP), unit goes to the standby
mode then displays the 2 blink fault. Could be a short in the power
supply of any of the circuits.
This blinking is a diagnostic code. Please update this with the model number. These sets contain circuitry that will shut the set down and display a code like this when a problem is detected. With the model number, I can look up the problem and provide potential repair suggestions.
This unit is having a problem with component failure and is going into the protection mode. This protects the unit from further damage. You will have to take or send your television in for testing and service.The service center will have all the service information to analyze the problem and do the repairs. If you had given the brand name and model number of the television, i could have directed you to a customer support website or telephone number. This information can be found in your owners manual. I hope this information helps you with your problem.
thats pretty normal, it takes a good second or two to warm up and the display to turn on(at least0, you get the green flashes as you hold for on, 1 sec is a long time at times, lol, be patient, no problem with your tv!
upon hitting the power button, the red light showing on the front of the tv should flash a couple of times, the screen should come on and the light goes off..the red "stand by " light stays on and we cannot get the screen to come up..needless to say, cannot get to the menu to change any display options...any suggestions?
turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.
I own a Sony T.V. model #KV36HS510, Serial # 9024184,Event# E36002407 and it"s aTrinitron brand name. Like the problems before no picture or sound, stand by light on front of unit flashes. When trying to turn it back on you can hear the power click, like it wants to turn on, but does not.
did that. didn't work
×