Dell printer not printing!!

First disconnect the printer from mains power for 5 minutes.

Try uninstalling the printer, reboot the computer, then reload Software and Drivers. It sounds like a software corruption issue.

Also check Print Properties so see if 2 sided prints has been set as default

Finally, Google

make model reset

Please always include full 'make model (what it is)' in all questions.

Please adjust paper size in printer properties.

What document you are trying to print?
If it is Excel or Word document you have created a second blank page, reopen the document and delete the second empty page.

Your paper feed selonoild is defective. The part number in 5p1km. I'm am dell printer tech.email me at [email protected] for more info.

Hi,

Your problems states that photos are being blank when trying to print it.
Please try these tips.

• Make sure your printer is selected in the Print window or in the Macintosh Page Setup and Print windows.
• The print head nozzles may need cleaning.
• Make sure your printer software settings are set for the paper size you're using.

Plus,i also wanted to know if you can print ordinary documents or print a test page.

Hope this helps.

Thanks,

FixerDelta

Generally, there are printer set up programs that will let you chose to put a blank sheet or to not do that. If you have a disk or manual, look for the set up utility and go thru the tabs to find paper handling or something similar to that. There should be a check box you can clear to stop the blank page.

I hope that this information was helpful. Have a great day.

Brian

Make sure you inserting the paper not deep inside just insert and stop it when you feel any resistance .and try to print something. If it is print then well otherwise you have to show it service center.

either your paper size settings need to be adjusted in the software, or your setup has included a seperator page.

You need to put the test page that was printed into the scanner part of the printer and then press the scan/blue button. This is so the printer can calibrate the new ink. When you have done that the next time you turn on the printer a blank page will not be printed. When you next change ink you will have to repeat the above procedure.

Try to print first a self test page on the printer. Does it print a blank page also ? Do you have good or new ink cartridges in the printer ? Let me know.