cookie_0047,
If you have tried entering the codes and it still won't work, the next step would be to do a power scan. This scans every code available for the TV, and when it finds the correct code it powers down. I have listed the steps below!
Power Scan:
1.) With the desired equipment on, press and hold the desired mode button (about six seconds) on top of the remote until all mode button backlights come on, then release.
2.) Press 0 for a TV, 1 for a VCR/DVD, 2 for any other device then press STAR (*) and press and release the Power button.
3.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
4.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.
If you need any further assistance feel free to ask or you can reach me at
[email protected]Tommy Faust
DISH Network
×