Refer to the troubleshooting section of the manual. If you do not have a manual, you can download a free one here - http://www.brother-usa.com/manuals/default.aspx?PGID=3&R3ModelID=CS6000
Turn off the power and then turn it back on.
Lower the presser foot before continuing operation.
An "E1" message appears on the panel.
Description:
The foot controller was pressed (or the start/stop button was pressed if the foot controller is not connected) and the reverse/reinforcement stitch button was pressed while the presser foot is raised.
Lower the presser foot lever before continuing the operation.
526 views
Usually answered in minutes!
×