Want an owner manual for an old Kenmore 70 series washing machine havy duty super capacity plus mod. # 110 22722101 ser. # CL4432583

hum either a bad timer sticking the point contacts close. have u tried this in all cycles? and possibly a motor with bad windings not enough power to run agitation? try running in mild or gentle and see what happens? I was tempted to say the cam dogs in agitator but they dont work then stop then work, when they go out they go out.

Have you checked the drum for residue that may actually prevent it to spin? try to check the cycle selector as well and try to load more clothes... keep us posted, thanks for using fixya!!

You dont. If it is making noise drum bearings or idler needs replaced

It is a 3.2 cu. ft. super size.

For the slow water issue, you will need to replace the water inlet valve. Here is a link to the part.
Could you describe the noise and where it is coming from?

go to appliancerepairplanet.vstore.ca and they can help u in this matter

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.

It sounds as if your pump is bad.

See the following illustrated description of how to access and check / replace the pump.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=134&osCsid=8eaba8b07483055c9c0f23bd2274f0a8

3.2cu ft.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Tyler,
It came off of the Clyde, OH production line the 26'th week of 2001.

Amazing, ain't it? Seriously... the info is embedded in the serial number. Here's the link to the code sheet.

Please remember to rate this solution as "FixYa", OK?

SG

If it drains and won't spin you have to replace the direct drive coupling.