Kenmore HE2 Plus Front Load Washer Logo
Anonymous Posted on Mar 09, 2010

Our Kenmore HE2t reads F26 and stops running half way through cycle

  • Anonymous Mar 09, 2010

    On a two hour wash cycle it will stop about 50 minutes into the wash, read F26 then power off

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 15,935 Answers
  • Posted on Sep 28, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 21, 2008
Answers
15935
Questions
19
Helped
5034052
Points
35540

DOOR SWITCH ERROR

If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.

Possible Causes/Procedure

-Door not opened during 3 consecutive cycles.

1. Open and close the door.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

-Door switch open while door is locked.

1. Push the door and check if it is completely closed.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.####

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My washing machine Kenmore HE2t has a Code 3H. Door is locked with load inside

Unplug or turn the circuit breaker off for 2 mins.
Repower the unit.
Press the Pause/Cancel/Stop button twice to clear the code. Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

Hope this helps
0helpful
1answer

F-24 error code so I ran a clean washer cycle, and the laundry room is now flooded.

what's f24 code? - Kenmore Elite HE3 Washing Machine ...

https://www.ifixit.com/Answers/View/85549/what's+f24+code

iFixitAug 21, 2015 - Aiman, The F24 error code indicates a water temperature sensor reading that is ... The Kenmore Elite HE3 is a washing machine by Kenmore.

F24 Error Code on My Kenmore Washer ' eHow

www.ehow.com > Home
F24 Error Code on My Kenmore Washer. Kenmore washing machines have several high-tech features, such as a stain treatment option, reduced energy and ...

Kenmore HE2 Plus Front Load Washer F24 error code ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
...error code F24 I have a Kenmore HE2T washer and I keep getting an F24 error on it.. I have no idea what is means can't find the manual help!!! The "F24" error ...

I have a Kenmore HE2T error code F24 - Fixya

www.fixya.com/support/t3608391-kenmore_he2t_error_code_f24
Dec 9, 2009 - Posted on Dec 09, 2009.
0helpful
1answer

My Kenmore HE2t washer is stopping about 8 minutes into the cycle (any wash cycle)..completely turns off. I can run rinse and spin then and it completes the cycle. No error codes when it turns off. W

htc sensor isnt working i would recon
perhaps the element isnt getting power
did it trip your circuit breaker
some times the htc fails
all you get is machine stop because the heater is not detected

if it spins rinses and empties in a timely manner
then all thats left is the heater system
1helpful
1answer

How do I repair F 26 on a Kenmore frontload washer

if you get the F26 error code, Press Stop, Open the door, press the black button just above the right middle of the machine opening, above the latch, hopefully, you will also hear a click, and then your machine will work normally.
0helpful
1answer

My kenmore he2t is spilling water out of soap dispenser

The dispenser is removable like a car ashtray. Put it in the dishwasher and run it through a cycle Or soak it in hot water and clean it.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

0helpful
1answer

I have a Kenmore washer HE2 plus and F26 is flashing

DOOR SWITCH ERROR

If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.

Possible Causes/Procedure

-Door not opened during 3 consecutive cycles.

1. Open and close the door.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

-Door switch open while door is locked.

1. Push the door and check if it is completely closed.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.%%%%
4helpful
1answer

What does error code F26 mean? The washer will fill with water, work for about 5 minutes and then post error F26 and stop working. Where do I find the error codes?

DOOR SWITCH ERROR

If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.

Possible Causes/Procedure

-Door not opened during 3 consecutive cycles.

1. Open and close the door.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

-Door switch open while door is locked.

1. Push the door and check if it is completely closed.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.$$$$
0helpful
1answer

I'm getting an F26 code on a Kenmore Elite he5t front load washer

DOOR SWITCH ERROR

If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.

Possible Causes/Procedure

-Door not opened during 3 consecutive cycles.

1. Open and close the door.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

-Door switch open while door is locked.

1. Push the door and check if it is completely closed.
2. Verify CCU operation by running a Diagnostic Test or any cycle.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!!!!
1helpful
1answer

Every time I start my Kenmore HE2t washer there is

If it has a clean cycle that says, "Bleach Only," run it with 1/2 cup bleach right in the machine. If not, run it on the longest, hottest cycle you have. In the future, leave the door open slightly between loads.
13helpful
4answers

Fault code F20 on kenmore he2t clothes washer

I have a brand new front loader that never fill with water but shows F20. How can I get this machine to wash clothes?
Not finding what you are looking for?

635 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...