How do I record photos using memory card? I can't figure out how to switch from the internal memory to the memory card. Read the book...asked my daughter...asked my husband and none of us can figure it out. Thanks in advance for your assistance.

connect to your computer to access pics,use a sd card for your pics after

If you have a memory card inside the camera, you have to remove it and then turn on the camera, press the photo review button and you should see what is recorded in the internal memory? You can now delete the photos or recordings off the internal memory, mind you that most internal memory on cameras are limited but to a few photos only, you are better off using a regular SD card since it has way more memory than the internal memory in the camera.

What model Olympus camera?

I have succeed to recover photos from memory card with Tenorshare Data Recovery.It is a professional photo recovery software that can recover data after deeply scanning your memory card to look for lost data. By the way,you can download it and scan your memory card for free to preview whether your photos can be recovered.Get it from http://www.any-data-recovery.com/

Okay "normally" when the memory card is installed the camera reverts back to the memory card from the internal memory. Two things might be happening here one the internal memory needs to be downloaded to the memory card then saved to the computer and the internal memory card formatted. then the memory card formatted to clear those pictures. And or there is a setting switch in menu or set up that you need to manually switch from internal memory to memory card.

I know when I read this over it made scents so you might need to read it a few times to get the idea of what I'm telling you needs to be done

Judging by your explanation, the photos are on your sd digital memory card rather than the internal memory.
Since you are unable to delete just those 15, it sounds like you might have accidentally enabled the "protect" function.

Get out your manual (or download a new one) and read about how to protect/unprotect photos, and also read about how to format your card in camera - something you should do on a VERY regular basis for the health of your memory card.

While you have the book out, read ALL of it - twice! You'll be amazed how much you'll learn.

Judging by your explanation, the photos are on your sd digital memory card rather than the internal memory.
Since you are unable to delete just those 15, it sounds like you might have accidentally enabled the "protect" function.

Get out your manual (or download a new one) and read about how to protect/unprotect photos, and also read about how to format your card in camera - something you should do on a VERY regular basis for the health of your memory card.

While you have the book out, read ALL of it - twice! You'll be amazed how much you'll learn.

I assume you mean transfer from internal memory to card?
This is on the menu system - simple scroll through the menus to find transfer.
Also the MANUAL[Handbook] will tell you.
no book - look on the software disk it is there as a PDF file that can be read/printed.

Talking about the Camera only here Check the manual for internal memory use. Put the memory card in. Use the menu button to switch between internal and card If your computer is XP you do not actually need any software to read the camera. Check the manual re this

Recording Still images To The Memory Stick M.REC mode (Memory RECORD mode) 1. Set the mode switch to MEMORY CARD. 2. Set the power switch to CAMERA. 3. Press the PHOTO button. The still image is recorded to the Memory Card. To View photos on the Memory Card M.PLAY mode (Memory PLAYBACK mode) 1. Set the mode switch to MEMORY CARD. 2. Set the power switch to PLAYER. The last recorded image appears. If there are no recorded images on the Memory Card, NO STORED PHOTO! or NO STORED MPEG4! will display on the screen. 3. Using the (FWD) and (REV) buttons, search for the desired still image. * To view the next image : press the (FWD) button. * To view the previous image : press the (REV) button. * Pressing (FWD) when you are on the last image will take you to the first image and pressing (REV) when you are on the first image will take you to the last image. * Keep pressing (FWD) or (REV) to search for an image quickly.