Intermec CK31 handheld - Configure to read bracket symbol

usually you need to configure the reader to tell it what kind of barcodes you want it to read and how to interpret & output the codes to your computer (whether you need prefix or suffixes to your codes( for automation))

the user manual for the reader has some bar codes to configure the settings for the scanner.

Someone mistakenly added a character before the data during the configuration.You may try factory default setting using configuration barcode.

Hi Chris,

You need a few things to be able to connect your Intermec CK31 to a server and all the settings are within the "Intermec Settings" within the terminals control panel.
First thing to start with is the wireless profile, set this up to match your current access point wireless settings, SSID, Encryption Type, Key etc. You can also set your wireless IP. Once this is done there will be an icon in the taskbar that shows connection and signal strength. Depending on the firmware revision of the terminal you should be able to use the tools to ping a device on your network, if the server responds to a ping then you should be able to get to your server when you try and connect.

I hope this helps.

If you need any more help then please do not hesitate to contact us:-

[email protected] or TEL +44(0)1202 620955

http://www.biastechnology.com/

Acutually, some kind of conbinations of bar color and background color will prevent barcode readers from accurate scanning. So I think you should check whether your color combination is feasible first.
I want to attach an image, but it is too big to upload.

THE BAR CODE IS READ CODE BUT NOT WRITE THIS CODE IN THE COMPUTER FOR EX: WORLD

What software are you using with the scanners as it can be configured to only read codses beginning in a certain number

I had the same problem with LS4278, you need to configurate your keyboard and scanner in the same regional and language options

ALT + UP Arrow

In the user manual for this device there should be a code book (or code pages), These are a selection of barcodes which you use to configure the device. One of the settings is to omit the barcode header (which indicates a type of barcode for instance a PART number might begin with P or a Serial number might begin with an S) This barcode system may have been initially programmed to omit these code letters Gareth