Looking for manual fo an lf-irx

It is 14 years old, the battery is probably flat. It takes 4xAA batteries. Use fresh batteries and observe correct polarity.

https://www.manualslib.com/manual/1877604/Leapfrog-Didj.html?page=4#manual

LeapTV - Troubleshooting - LeapFrog

https://www.leapfrog.com > en-us > support > products
Are game cartridges compatible between LeapPad and LeapTV? How long will batteries last in controller? The tether on my LeapTV controller broke, ..

..

https://www.leapfrog.com/en-us/support/products/all-products

I couldn't be sure which product manual applies, so I would suggest contacting the company.

https://www.leapfrog.com/en-us/support/products/leapfrog-epic



https://www.leapfrog.com/en-us/support/products/all-products

Find a store which carries it, and they will normally accomodate a swap for something else.

This link should help you.
https://leapfrog.custhelp.com/app/answers/detail/a_id/2349/session/L3RpbWUvMTQyNDM2MDI5NS9zaWQvRVBPcTRwZm0%3D

Link to all Leapfrog guides / manuals: www.leapfrog.com/en/pages/support/parent_guides.html
Link to Discovery ball instructions: www.leapfrog.com/etc/medialib/leapfrog/parent_guides/pg_infanttoddler.Par.5913.File.dat/pg_discoveryball.pdf

You can get the manual on the link below.

http://www.leapfrog.com/etc/medialib/leapfrog/support0/parent_guides.Par.51415.File.dat/10250_Zippity_Parent_Guide.pdf

http://www.leapfrog.com/en/pages/support/top_product_list/Zippity.html

Good Luck please rate 4 thumbs up and please leave a testimonial

I bought my 2 for my grandsons for Christmas and both had the same problem. I Googled LeapFrog Connect and downloaded it. After you download it, plug the unit up to your PC with the USB cable that came with it. When you start LF Connect, it will tell you that there is an update for your Didj. Follow the prompts and you should not have any problems.


Charlie

Battery BLUE/WHITE (+) RADIO HARNESS
Accesory YELLOW/RED (+) RADIO HARNESS
Ground BLACK (-) RADIO HARNESS
Illumination RED/BLACK (+) RADIO HARNESS
Power Antenna YELLOW/WHITE (+) RADIO HARNESS
LF Speaker (+) BLUE/GREEN
LF Speaker (-) GRAY/BLACK
RF Speaker (+) RED/GREEN
RF Speaker (-) BROWN/BLACK
LR Speaker (+) BLUE/YELLOW
LR Speaker (-) GRAY/WHITE
RR Speaker (+) RED/YELLOW
RR Speaker (-) BROWN/WHITE
Steering Cntrls NO
Speed Cntrl NO
Radio Security YES

QUICK Summary:
- Download and install "Leapfrog Connect" manually.
- Wipe/reset your DIDJ (maybe...)
- Install the free game.

LONG Summary:
Like most people here on the forums and question boards, the didj hung or failed to download the update: "Download failed. Please try again."
I found that the .EXE from the CD, created a folder in the C drive "C:\Program Files\LeapFrog\log", where the file name was "Sniffer_*date*_*time*.log" Example: Sniffer_090102_1916.log
In this log file, there were two references to the remote files it had to download (in the display window, it says 101 Mb. So the two files below add up to about that much):
http://download.leapfrog.com/leapfrogconnect/PC/didj/DidjPlugin.exe (78Mbs)
http://download.leapfrog.com/leapfrogconnect/PC/UPCInstaller.exe (25 Mbs)
The DidjPlugin.exe is the "Leapfrog Connect" installer, while "UPCInstaller.exe" is the free Jetpack Heroes game.

I cancelled the hung or timed out program launched from the CD, rebooted the PC, and then proceeded to download these two files manually.
After downloading these two files, I double-clicked each one. There was no dialog box or confirmation or license agreement page, destination folder, etc, etc, etc. This was a 'silent' installation, with
no prompts (save for the Windows security prompt: "Are you sure you want to run ...exe?"
I then proceeded to wipe the handheld (because it was stuck on "Downloading Update, please wait...).

Launch Leapfrog Connect:
1) Press the "Ctrl + Shift + R" keys in sequence and hold them down.
2) This should open a window that says "Connect the device you would like to reset".
3) Connect the Didj.
4) Eject the Didj when done.
5) Recreate your player profiles on the Didj and connect again.

I could be wrong, but wiping the didj did not erase the free game. I don't remember, but there was a point to sync the didj and then the game was there... Anyways...
After restarting the didj and creating a new profile, connecting to Leapfrog Connect, the didj should be good to go.

I do have a couple questions:
Why only have a small 5Mb self-extracting installer on the CD? Why not include the larger (75-78Mb) "Leapfrog Connect" on the CD?
Why not have the free game ALREADY installed on the didj? That way, when it comes out of the box brand new, you get to start playing right away...

Thomas

My (kids) PC specs: AMD Duron 1.2 Ghz, 768Mb RAM*
Windows XP, Service Pack 3

http://leapfrog.custhelp.com/cgi-bin/leapfrog.cfg/php/enduser/std_adp.php?p_faqid=1449&p_created=1153327777&p_sid=BzNLCfWi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0yODgsMjg4JnBfcHJvZHM9JnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MQ**&p_li=&p_topview=1

The above link is from leapfrog and posts all of their known dvd codes. Unfortunately, yours is not listed.

Did a bit of research and it looks like the Venturer is a budget off-brand made by Alco who also makes Toshiba. So I would suggest trying the Toshiba code first (which is "57") or else calling the leapfrog customer service number located on their website.

Good luck!