Finding remote code

At the bottom of the set.

Mintek RC-32DT Original Remote control


Mintek RC-32DT Replacement Remote control

You need to replace your main board. This is a heat issue on your micro and cannot be fixed at component level.

nnealrs1998, The remote control may need new batteries. The remote will not receive any information from the tv. The tv needs to receive commands from the remote control. Find where the Receiving "EYE" on the front of tv is and make sure it is dust free so it can see the Infared light signal being sent by the remote. Always point the remote directly at the front of the tv set. Hope this helps. 12fixlouie

GO TO
http://www.electronicadventure.us/Merchant2/merchant.mvc?Screen=PROD&Product_Code=RC-32DT&Category_Code=

Here is the fix for this problem:

http://www.fixya.com/support/t300197-tv_w_built_in_dvd

I have an entire MEMTEK DTV-323 with remote. I was looking for a power supply but have not had any luck.

my 323 lcd has power sound and plays dvds but i cannot see a picture

check out http://www.retrevo.com/s/Mintek-DTV-323-D-TVs-review-manual/id/582ag907/t/1-2/. 
registration is free, then you can download a pdf of the manual..

Its a MINTEK !!!