How do I remove the bolt froma Winchester ,odel67?
Pull stock off your model 67 win. The trigger stays in the stock . Lift up on the barrel and action while pulling it toward the end of the stock. To separate them. Next open the bolt , then reach under the action grasp the arched piece of spring steel . Pull down gently on the spring steel retainer while pulling back on the bolt. You can also remove the ejector assembly in the same manner pulling down on it. Assemble in reverse order.
SOURCE: How to remove the Bolt from the Action of a Model 52 Winchester??
Pull the trigger to the rear, while holding it there pull the bolt to the rear removing it.
Jack
SOURCE: How to remove the Bolt from the Action of a Model 52 Winchester??
I can't speak for all models of the 52, but n my 52B you push the safety forward with the bolt open and it will come right out.
1,435 views
Usually answered in minutes!
Got it apart. Never saw one come apart like this before so it was interesting. Thanks
Is this a gun question, Winchester model 67? Pre-world war? I would check with a gun club or repost this question as a firearms question.
×