I can't find the p6t deluxe v2 motherboard manual, how can i get it?

what os you got?

test all leads that attach to your hard drive electrical,IDE,SATA even electric extensions also from your motherboard to your hard drive also test all drive leads cd,dvd,3.1/2 floppy
hope this helps

Conventional/Extended memory failure

http://support.asus.com/download/download.aspx?SLanguage=en-us

If you are also experiencing a problem saving the date and time in the BIOS, then you probably need to replace the CMOS battery. Also, chech to see if the CLEAR CMOS jumper on the mobo is set in the correct position.

Open the link provided below. Asus Specifications P6T SE;
http://www.asus.com/product.aspx?P_ID=t4yhK6y9W9o7iQ9E&content=specifications
The best MB of the Asus P6T series is the P6T Deluxe V2;
http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx&content=specifications
If you want either MB and you want it to run ultra fast buy a 10,000RPM SATA 300 hard disk drive. Read this post by Jeff;
http://www.codinghorror.com/blog/archives/001304.html
I like the three year warranty that Asus provides. Most MB manufactures only warrant their boards for 1 year.

I hope this helps you to decide
Cheers!
Mike

Some motherboard manufacturers make there motherboards (MoBo) "Overclock-friendly", and yes Asus does make the motherboards that are in that category. If the one you currently have lack of that feature, you could get third party software but be carefull and read the instructions before you change anything. Besides, take into consideration that you have to have optimal cooling devices for your component such as air cooling or water cooling before you overclok anything in your computer, keep this in mind: overclocking=heat increase

No that is not true. Though the percentage is higher if you try to overclock on that motherboard. As long as you don;t do any overclocking you should be fine.

make sure your settings are correct on the hard drive. try setting to cable select. if that does'nt work try master pos. reboot and should work.

Restore your PC before the BIOS update. BIOS updates are not required until & unless you face problems while running a software and it will prompt you for BIOS update. Do this update if its vital othewise do not intergere in the BIOS. I faced the same problem and after unistalling all drivers and again reload the original driver from MB VD slved it. Another thing in BIOS is USB setting at high-spped & full-speed. Try changing those settings and retry. Mine worked!...sodeep