My camera says the pictures upload onto my computer but then nothing happens after that....the pictures dont upload what is the problem?

Are you sure you did install the software that came with your camera? Without any software, your computer can't; even see there is a camera connected. Let alone get any file from it.
If you had the software on the computer, remove it and try to reinstall it. While installing, the correct driver(s) will be installed on your computer too.

Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

The camera will need to be plugged in and turned on for you to be able to transfer pictures from it.
Plugging the camera in will not make anything special happen on its own-- if you are using Windows (after the camera is plugged in, turned on, and with your memory card still in the camera), try opening "My Computer" and looking for the camera's icon within that window. The camera (and the photos on the memory card inside) will be shown just as any other CD or jump drive that you would plug into your computer. You can copy photos off of the camera by double clicking the camera's icon, (probably opening the DCIM folder) and dragging and dropping the image files onto some other location on your computer.

If you have a windows computer open My Computer and see if your camera shows up there if not you may need to try a different USB cable.

Try NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa.
Organize edit and share your photos

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Goto any radio shack and get a external memory card reader this will allow you to get your pictures if the camera or cable is defective.

Make sure the camera is turned on, plug the USB cable into your PC first, then into the camera, wait for a beep from your PC to show it has recognized the hookup, then go to "My Computer" and look for the Fuji icon. Don't unplug the camera anytime the lights are flashing on it.

go to my computer it will say your cams name cick on it

It sound like a computer and not a camera problem. Does it you first time to use this camera with this cumputer ?