NEED TO KNOW WHERE TO GET SOFTWARE FOR DSM627SP TO HOOK UP TO MY COMPUTER TO USE PRINTER

press the counter key.
tap the system settings on the screen
select tray settings and select the type of paper you prefer and tap on the ok .
After this open the tray and set the tray settings to the paper size.
All the best of luck .

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1119598&lc=en&cc=us&dlc=en&lang=en&cc=us

Go to that link and simply select your operating system, click "next", download and istall your printer's drivers in your computer.

you can download the software from the net you can search the drivers my typing the name and model no or you can go the printer site and download the software connect the printer while downloading the software

Your software still is looking for the 25 printer pin connection from the motherboard. I don't know computer set up from an engineering concept, but I do know that the usb connection you purchased doesn't work with that software. You'll need to either get the new software or a used computer with the printer port hook up.

http://software.canon-europe.com/products/0010230.asp
from above link you can download the software ...

Go to Brothers web site and look for downloads or drivers. Download the drivers for your model and install them. Also if it has any software/manuals that the model uses you should find it there as well. I you already have software installed I would uninstall and reinstall the software you download.

You can format the new hard drive after installing it.

It's in the printer menus somewhere.

There is no much to hook up, you hook up the RJ11 phone connector at the back of the printer to the phone line.
Install printer software onto the computer.
Then connect printer to computer using USB cable.


See here , there is user guide for all x7300 series:
User's Guide
see also
Lexmark X7350 Top 20 Questions
Here also notes on how to set up fax
Lexmark X7350 - fax problem

Have you tried the default UN and PW? UN: admin PW: password

I have an C210SF Multifunction Printer connected to a computer with a Vista operating system. I am unable to use the fax or scan functions. Does anyone know of a solutions? Thanks