Mitsubishi WS-48513 48" Rear Projection Television Logo
Posted on Mar 18, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Blinking Green Light on Mitsubishi DLP 52525

I have had a Mitsubishi DLP 52525 for 2+ years now and recently the green timer light started to rapidly blink when the unit was turned on and it continued to blink without the picture coming on. After discconnecting the power and then using the system reset button, the problem remained. I swapped out the lamp and the tv worked for about a day and now the same problem is occurring. I have hit the system reset button but to no avail. There is nothing in the manual that deals with what is indicated by a constant blinking green timer led. Looking for suggestions. Just did the repair that Chris mentioned by changing out the 4 caps and no change. Plugged the set in and the green light on the front continues to blink. Hit the reset button and no change. Suggestions? Ideas ? This is on a 2004 WS-48513 Mitsubishi.

  • joeaksa Mar 19, 2008

    Can you help me identify the Pico fuses?

    Once I find them just use a VOM to do a continuity test on them?

    Thx,

    Joe

  • joeaksa Mar 19, 2008

    Can you pls give me some idea where the fuses are? What they look like?

    Thx,

    Joe

×

1 Answer

Sonny Berry

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Mitsubishi Master 8,617 Answers
  • Posted on Mar 18, 2008
Sonny Berry
Mitsubishi Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jan 03, 2008
Answers
8617
Questions
2
Helped
1723070
Points
23750

Check the pico fuses on the reverse side of the DM , Just check them in circuit for continuity. let me know how you make out, and if you need any more advice lert me know

  • Sonny Berry
    Sonny Berry Mar 20, 2008

    they are just small ceramic links solderd directly to the back side of the circuit board they are usually brown or black. They will be listed in the service manual by location so you can find them

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Blinking Green Light on Mitsubishi DLP 52525

the circut that detects the bulb has been also failing in these sets
and the conversion chip that controls the picture , and the transformers are not putting out the full power they are supposed to.
this set will need to be tested to determine the exact cause or causes
0helpful
1answer

Blinking Green Light on Mitsubishi DLP 52525

Try the ballast that gives power to the lamp,I have the same problem,got a lamp for $109.00 at discount-merchant,thisa is my second problem with this tv in about 3 years,sucks.
0helpful
1answer

Mitsubishi WD-52525 52 in DLP.

You most likely need the V26 DM repair kit at the following link, that usually repairs the blinking led problem.
http://servicemanuals.vstore.ca/
1helpful
1answer

Blinking Green Light on Mitsubishi DLP 52525

The 52525 is definitely going to either:

1. have the caps on the FMT/DM board replaced (not something I'd recommend you do yourself)

2. have the electrical chassis rebuilt (as sometimes, you can replace the caps and still have the problem).


wait time: 4-8 weeks
cost to rebuild: $400-$500
cost for labor: $200-$400
1helpful
1answer

Green status light keeps blinking after lamp replacement

continuous blinking green light indicates that the capacitors have failed on the DM pwb. You need the V26 DLP DM repair kit which is available at the following link under their repair category.
http://servicemanuals.vstore.ca/
0helpful
1answer

Blinking Green Light on Mitsubishi DLP 52525

Replace the 1000uf capacitors on the DM board. thats whats causiong the problem. If you need further help go to this link they have your service manual available for emailing after purchase and that will entitle you for free tech support and one of their techs can fix those sets in his sleep he will walk you through the repair which parts are only about 20 dollars to fix the problem.
http://servicemanuals.vstore.ca/
0helpful
1answer

Blinking Green Light on Mitsubishi DLP 52525

the dlp will most likely need a qualified mits repair center to take over for you. repairing that set is pretty involved. and the parts you would need are not available to the public.
on your 48" CRT projection check the DM module for 4 vented 1000mf 16v capacitors. replacement should get you tv working great
1helpful
2answers

Constant green blinking timer light

http://www.chrisandnat.com/Projects/BlinkingTV/blink.htm http://www.jeremyburns.com/Mitsubishi-Green-Blinking-Light-Fix.pdf
http://www.fixya.com/howto/h159332-mitsubishi_dm_board_repair
http://hdtvoice.com/voice/showthread.php?t=32186
Suspect the DM PCB part # 934C116002
0helpful
2answers

Blinking Green Light on Mitsubishi DLP 52525

No problem, do self diagnosis test, read threads here or goto ctechnicians.com get error codes first and get back with me.
Not finding what you are looking for?

368 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...