My tv only recieves 13 channels when plugged into cable when it should recieve over 70. my other tv gets all the channels so i know it is the tv. what should i do?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
U are recieving an using DTV Free AIR broadcasting tv signal wright,get a better antena like a roof or a newly design digital antena for uses.This problems dose not happen to cable or sattellite services,i know this because their broadcasting tv signal frequencies are very strong and very high ranges of a broadcasting signal output for their recieving boxes.
do a channle auto scan, you need to select CATV in order to scan for cable channels. after the scanning process, all the channels you can get should be on your set.
Sounds like you need a set-top box from the cable company. You hook that up to your TV, tune the TV to Channel 3 or 4, and use the set-top box to tune in all the channels.
If your tv tuner on vhf only goes to channel 13 you will not recieve uhf channels if you are hooked to cable tv. You can do a search for mid band to uhf converters (converts uhf to vhf).We used to use them in the early 80's. Even if you can find one it will only go to channel 22.
Yupp(depending on how old your stuff is)
I will assume your using cable and using your tv to switch the channels. Look at the back of your tv there should be a audio output, plug some RCAs (red, and white) into the designated spot and now look on the back of your reciever, it should have a tv input, if not just a input.
After that is done turn on the tv and put the reciever on the channel that you plugged it in.
For example if you plugged the rcas into Tv input...then you would set the reciever to TV
I can program up to Ch. 25..
my tv only goes up to channel 13 when hooked up to cable
yes, same problem, it does not picking all cable channels.
×