How do i turn on the auto timer? - Sony Cyber-Shot DSC-W5 Digital Camera

Woods TM-068-2

Indoor 7-Day Astronomic Timer

125V ac / 60Hz 15A / 1875W general purpose

8A / 1000W tungsten 500VA electronic ballast

15A / 1875W resistive 120V ac / 60Hz / 8,3A ballast

FEATURES:

• Up to 7 different programmable ON/OFF cycles, cycles repeat weekly.

• Programming fl8xibilify: u8hts fun on/off automatically at sunset/sunrise,

or at any programmed times you choose.

• ln Sunrise/Sunset programming mode, timer will automatically adjust the

programmed ON/OFF cycles to match current sunrise/sunset times.

• Timer automatically adjusts to daylight savings time

WARNING: TIMER IS INTENDED FOR INDOOR USE ONLY!

BEFORE YOU BEGIN PROGRAMMING THE TIMER:

This timer has in internal battery backup to save all programming.

1. Plug the timer into wall outlet for 30 minutes to charge internal battery.
   

2. After 30 minutes, unplug timer and press the RESET button with the tip of a toothpick or similar object to clear the memory.
   

TO SET THE CLOCK:

1. Press SET. PRESS +/AUTO or -/RDM to set the current year.
   

2. Press SET. PRESS +/AUTO or -/RDM to set the current month from 01 to 12.
   

3. Press SET. PRESS +/AUTO or -/RDM to set the current date.
   

4. Press SET. Daylight savings mode (DST) will appear on the bottom of the display. PRESS +/AUTO or -/RDM to set mode to either DST AUTO or DST OFF.
   

5. Press SET. PRESS +/AUTO or -/RDM to set the current hour. To change between AM and PM, press +/AUTO or -/RDM 12 timers.
   

6. Press SET. PRESS +/AUTO or -/RDM to set the current minute from 00 to 59.
   

7. Press SET. PRESS +/AUTO or -/RDM to set the Astronomic function to your zone - North (nor), Central (cen), or South (sou).
   

8. Press SET to view the sunrise time. To adjust sunrise time press +/AUTO or -/RDM. To go back to the default sunrise timer press ON/OFF.
   

9. Press SET to view the sunset time. To adjust the sunset time press +/AUTO or -/RDM. To go back to the default sunrise timer press ON/OFF.
   

10. Press and hold SET for 5 seconds to exit clock setting mode.
    

PROGRAMMING THE TIMER

Note: The timer allows a maximum of 7 programmable ON/OFF cycles.

To program the first ON/OFF cycle: Press SET repeatedly to scroll through setting the clock mode.

1. Press SET to display ON 1 setting.
   

2. Press +/AUTO or -/RDM to select day or group of days you want for cycle 1. Scroll to select either every day, any individual day, weekdays only, or weekends only.
   

3. Press SET. Set ON hour by pressing +/AUTO or -/RDM to scroll through and choose hour AM or PM, or Sunrise/Sunset icon for first ON setting. Note: To select Sunset or Sunrise for the ON time, you must scroll through all the AM and PM hours first. If you select Sunrise/Sunset as the programmed ON time, press SET to continue programming OFF setting.
   

4. Press SET. Press +/AUTO or -/RDM to set ON minute from 00 to 59.
   

5. Press SET to display OFF 1 setting.
   

Repeat steps 2-4 to program desired OFF time.

To program additional ON/OFF cycles: Repeat steps to create additional ON/OFF cycles (ON 2-OFF 2, ON 3-OFF 3, etc.) up to a maximum of 7 different ON/OFF cycles.

Press and hold SET for 5 seconds to exit programming mode. Note: During programming, if no button is pushed for 30 seconds, the timer will automatically return to standby mode. Press ON/OFF to cancel any setting.

Sun tracking technology: Timer adjusts automatically to changing sunrise and sunset times in sunrise/sunset mode is chosen for any programmed ON or OFF time. For example, if you program a cycle to turn ON at sunset and OFF at 10:00 pm, the timer will automatically adjust ON (sunset) time as sunset time changes throughout the year (and will always turn off at 10:00 pm as programmed).

IMPORTANT! REVIEW PROGRAMMED ON/OFF CYCLES: Press SET to advance through all programmed ON and OFF settings. Make sure there are no overlapping ON or OFF times. Stop at any programmed setting you want to change.

To operate timer: Press +/AUTO until AUTO appears in display. Timer must be in AUTO mode for programmed settings to operate. Plug appliance (such as lamp) into timer and plug timer into wall receptacle.

IMPORTANT: Appliance must be turned ON or be in the ON position before plugging it into timer.

SECURITY (RANDOM) MODE: To operate a plugged-in appliance (such as a lamp) in a random pattern while you are away, to simulate actual use: press -/RDM until RDM appears in display. In Random mode, plugged-in appliance will turn on and off at random, approx. +/- 30 minutes from the programmed settings.

To cancel Random mode, press ON/OFF until RND disappears from display. Timer will now function using your previously programmed settings.

DAYLIGHT SAVINGS (DST) MODE: If timer is in DST AUTO mode, clock time (and sunrise and sunset time) will automatically increase 1 hour on the second Sunday in March at 02:00 am and decrease 1 hour on the first Sunday in November at 02:00 am.

TO OVERRIDE THE TIMER: Press ON/OFF until desired mode is displayed:

ON: Programmed settings will be overridden; the plugged-in appliance will remain on

OFF: Programmed settings will be overridden; the plugged-in appliance will remain off

AUTO ON: Turns plugged-in appliance on immediately until the next programmed OFF time. Press ON/OFF until ON displays on the screen, then press +/AUTO and AUTO will display on the screen.

AUTO OFF: Turns plugged-in appliance off immediately until the next programmed ON time. Press ON/OFF until OFF displays on the screen, then press +/AUTO and AUTO will display on the screen.

RDM ON (Random ON): Turns plugged-in appliance on immediately until the next random off. Press ON/OFF until ON displays on the screen, then press -/RDM and RDM will display on the screen.

RDM OFF (Random OFF): Turns plugged-in appliance off immediately until the next random on time. On/Off times will vary +/- 30 minutes from the programmed settings. Press ON/OFF until OFF displays on the screen, then press -/RDM and RDM will display on the screen.

Consumer Support (800) 561-4321

www.colemancable.com

Check if the sleep timer is on. Go to settings and check under timer and check the sleep timer if it's on/off.

There is no repair for defective timer.

I suggest setting timer programs, and then press clock button and timer returns to current time.
At this point the timer is operational, and then do not mess with manual override button.
http://waterheatertimer.org/How-to-program-Utilitec-0155671.html

Correct setting is either AUTO ON -or- AUTO OFF setting.
Auto ON, means lamp turns ON immediately and programming resumes at next set point.
Auto OFF, means lamp turns OFF immediately and programming resumes at next set point.
So you have to wait for time to arrive at set point to see if timer is working.

Troubleshoot from link above:
Check that correct time is set.
Check programming for conflicts and overlaps.
For example ON 8:00 pm Tuesday and OFF 10:00 pm All-days-of-week will cause timer not to operate as expected.
Test outlet with cheap circuit analyzer to ensure that electrical problems are not causing problem.

Take a moment and rate answer:
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

I cannot repair defective timers, and there are complaints about this timer's MODE button.
Most people complain they can't get mode to set.
Avoid the MODE button after programming timer.
Reset the timer by pushing CLOCK PROG MODE buttons. Then re-program the timer per instructions, and then press CLOCK button to exit programming and timer is in Auto mode and ready to work.
No need to press MODE after programming timer.
Typically, this timer has limited 1 year warranty.

http://waterheatertimer.org/pdf/GE-15117-Manual.pdf
http://waterheatertimer.org/GE-timers-and-manuals.html#15117
15117 is not heavy duty timer. Both outlets combined are rated 1000 watts incandescent and 1/4 HP. Check nameplate on your pump for HP rating.

For limited-lifetime-warranty timer, rated 1/3 HP, choose Intermatic HB800RCL 2-outlet timer.
Cost twice as much as GE 15117.
For 1HP outdoor pumps choose Intermatic P1121
http://waterheatertimer.org/Intermatic-timers-and-manuals.html

Open following link to identify timer
http://waterheatertimer.org/Woods-timers-and-manuals.html#59377

59377 manual
http://waterheatertimer.org/pdf/Woods-59377.pdf

Auto: timer must be set in AUTO for programming to work
The word AUTO is printed on timer face.
Small black triangle will display above the word AUTO when timer is in AUTO

Countdown is feature that lets you set timer ON for set amount of time, and when time expires, timer turns OFF.

Manual button.
I have not tested this specific timer.
Simply plug lamp into timer, and then push manual button to explore feature.
Watch what symbols display, and watch what lamp does.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

It looks like the last thing you have to do is press the mode button until it scrolls around to 'auto'.

If you have followed instructions properly, and cannot get it off auto. then you will need a new timer, alternatively, the timer can be bypassed

hi there switch your oven off at the mains switch for one minute thenswitch back on and set the time this will disable the auto on the timer.

Press the *power button* once to start the heater on high power, continuous run. If left at this setting, the unit will run continuously on high power (1500 watts, 12.5 amps) and will not shut off until the unit is manually turned off.
Press the *power button* again, to change to low power, continuous run, (900 watts, 7.5 amps) and will not shut off until the unit is manually turned off.

Set temperature:

Press the temp/timer button until the temperature icon blinks. Use the up and down arrows to set the desired temperature.
The temperature icon will stop blinking and the current room temperature will reappear after the desired temperature is set.

The heater will turn off and on to achieve the desired temperature.

Set timer: (auto off)

Press the timer/timer button until the timer icon blinks. The hour display will appear. The auto off icon will also appear.
Use the up and down arrow buttons to set the heater operation time between 1 and 10 hours. This function will activate once the timer icon stops blinking. The heater will automatically turn off whn the times runs out.

Set timer: (auto on)

Press the temp/timer button until the timer icon blinks. The hour display will appear. The auto on icon will also appear.
Use the up and down arrow buttons to set the heater start time between 1 and 10 hours. This function will activate once the timer icon stops blinking.
The heater will automatically turn on when time expires.

Hope this helps!