Question about LG WM-1832C Front Load Washer

2 Answers

WM1832CW has stopped spinning. Tries to spin but

WM1832CW has stopped spinning. Tries to spin but cannot turn over with water and clothes. Drum appears to be "off" somehow.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 343 Answers

If the drum is loose it probably means that the bearings at the rear.....OR...The arms that connect the drum to the pulley shaft have broken.....Major job....Sorry.....Nomess

Posted on Apr 18, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • LG Expert
  • 536 Answers

While pressing the "Spin Speed" and "Soil Level" buttons simultaneously, press the "Start/Pause" button twice. Does the drum spin slowly?
If not, it could mean that the stator assembly of the motor is faulty or that the main PWB board may be faulty.

Posted on Jun 18, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Simpson swt8043 top loader washing machine agitates anticlockwise only from new.


The agitator is designed to “ratchet” and turn one way but not the other. If your clothes are being twisted, that is most likely a transmission problem where it tries to agitate and spin at same time

Oct 05, 2018 | Simpson Washing Machines

1 Answer

My miele wt945s takes in some water after final spin so clothes at bottom of the drum end up wet. Can I stop this happening


There is a problem with the programming of the control board if this is occurring.

All you can do is turn off the water to the machine at the end of the full cycle and then run the spin cycle again to dry out the clothes. Then no water can enter the wash drum.

Otherwise you would need to turn off the water each time before the spin cycle concluded and thus before the machine began adding water again.

Dec 08, 2015 | Miele Washing Machines

1 Answer

Drum doesn't really rotate on wash cycle.


No solution, but I have the same or similar problem - bootom agitaor works, top doesn't. Also softner spots clothes during spin cycle - help - I can't afford a repairman!

May 17, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Load remains wet after full cycle (including spin @ 1400 rpm)


Hi Paul, Assuming it is pumping out ok, Unplug the machine tip it back at an angle, underneath you will see a black hose that is attached to the bottom of the drum, remove this, take out the ball and discard it and remove anything that may be in the filter, replace the hose and try the machine.

Nov 30, 2007 | Hotpoint WMA64 Front Load Washer

1 Answer

Admiral AAV8000AWW washer - clothes are wet after spin cycle...


may be a loose belt or a partial blockage somwhere.

Nov 09, 2007 | Admiral AAV7000A

1 Answer

Hotpoint WM52 first Edition


I think you will find that if you check the brushes, you will probably need to replace them.

Oct 27, 2007 | Hotpoint Aquarius WMA52 Front Load Washer

1 Answer

WMA62


Have you checked to see that the waste is not blocked? THis is very common on these machines and causes the pressure switch not to operate, making the machine fail to spin or spin with water in the drum, causing unbalance symptoms.
This is extremely common on Hotpoint machines without a accessible filter. The filter is in the rubber waste pipe under the drum and needs to be removed to be cleaned out. When iti s blocked it also blocks the chamber that operates the pressure switch.

Dec 09, 2006 | Hotpoint WMA64 Front Load Washer

Not finding what you are looking for?
LG WM-1832C Front Load Washer Logo

1,079 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...