Error f35? What's the fix?
SUDS might arise out of adding too much detergent.
Power off, remove clothes from the machine, see if the machine operates on Spin and Drain. Then try a Rinse and Drain cycle with no clothes.
If all fine, put some of the clothes back and try normal wash cycle.
They can and fixed my washer today! The fix was the replacement of a switch. The item # was W10156252 for my washer. It is called a switch-WL. Item # may be different for your model. I was getting SUDS and F35 errors. To install it you just remove the top part of the washer and should be located at the upper right-hand side, attached to a black hose. The switch has a small computer board. The price of the swith is around $130. Fortunately I bought a 3-year warranty on my washer.
This is a suds overdoes error. Meaning it detects to many suds in the machine. Try using a rinse cycle to water down those suds. Then a normal cycle without adding any more detergent. This should fix the problem
Hello & Welcome to FixYa
F35 error means that there is some sort of issue
with the steamer electronic board and analog pressure sensor has gone bad.
Check that the hose is firmly attached with the washer and is not blocked. You
can also check the water level pressure switch operation. Please get back to me
if you have any other questions.
Kevin
1,046 views
Usually answered in minutes!
×