Where do I find a new battery pack for the Conair HC318XW hair clippers

The power setting adjustment screw on the Conair Model HC200B hair clippers is typically located on the side of the clipper near the on/off switch. To adjust the power setting, you will need to locate the screw and use a small screwdriver to turn it.
Here are the general steps to adjust the power setting on your Conair Model HC200B hair clippers:

1. Locate the power setting adjustment screw on the side of the clipper near the on/off switch.
2. Use a small screwdriver to turn the screw clockwise to increase the power setting or counterclockwise to decrease the power setting.
3. Turn on the clippers and test the power setting by cutting a small section of hair.
4. If the power setting is not to your liking, adjust it again with the screwdriver until you achieve the desired power setting.

It's worth noting that the power setting is usually a small screw and turning it too much can damage the internal machinery of the clipper, so it's best to make small adjustments at a time. And ensure the clipper is unplugged before making any adjustments.

Monday - Friday, 8am to 6pm EST by calling 1-800-211-9611

http://www.conair-store.com/category/0_1_12_1/personal-grooming-clippers

It could be the switch is shorting out or the cord is. If it doesn't cut off when you move the cord it is prob the switch.

You can use a damp cloth after use to remove hair and other debris. There isn't really a way to sharpen the clipper though. The work on more of a shearing motion, but if you notice it has a lot of pull, you can order new blades online.

If you purchased it recently and if you have the receipt and if you saved all the original parts it came with I would certainly return it.
Lithium batteries do need to be charged 24 hours at the very first opening of the box, but if you did that then just take the item back to WalMart.

Where can i find a new class 2 transformer for my conair hair clippers? model: UD0312A

http://www.conair.com/instruction_booklets/HC200ACS%20IB%209-29-061.pdf

are u talking about the clipper it self or the clipper blade i need to know which one

This is a test by FixYa Staff.

MODS - DO NOT REMOVE

Thank you!

i have an "hc318d" conair hair clipper. i took the two screws off to oil the inside and now i can't get it put back together properly. can u help?