Hello brother i have nokia n70 i opne camra but camra colour is black 2 camra not warking plz help me how i ripper my camras my email is [email protected]
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi First check the secondary camera (front),if it is Ok contact your sim card provider.If the secondary camera is not working, you cannot access 3G because front camera is the main module for 3G.Thanks for visiting fixya
All you have to do is.... gently loosen all the screw in the phone, open up to ensure that the terminal is still in contact with the panel. if it is still OK, gently recouple the phone properly and don't over tighten the screw. I assure you that the camera will start working immediately. BUT IF THE TERMINAL CONTACT WITH THE PANEL IS DISCONNECTED, get a soldering Iron (smallest size) connected to electricity, when it gets hot,take it very close to the spot (terminal) and touch the soldering Iron with a little quantity of heat silver that suits the position, and the heat silver will melt, then gum it with the liquid it brings out. Immediately it will get dried, gently couple the phone and the camera will work NOTE
Ensure that the hear silver doesn't drop on any other spot of the phone. i believe this will solve the problem
once out of the camera & deleted form the card, the camera will not display any of the images because it does not have that function. even jpeg images being the same format cannot be viewed.
you can take the battery and the back off the device and place in completely submerged in a bag of white rice and leave it in there for 1 to 2 days this will help absorb the moisture, this should fix it if the water did not damage the circut boards if the water damaged the circut boards then the device is fried
I Have no steps Taken
×