Was wondering if anyone had any contact information for the Neiko company. for the welding helmet, it mentions that the shield should be replaced every so often, but I can't find anywhere that sells the shields.

Is your welding helmet glass dark lens covered with spatter from welding and need replacement often? Cut a piece of 1/16" (1.5mm) clear perspex to the same size as the lens and install this in front of the dark glass. Spatter does not adhere to the perspex and the glass lens will be protected indefinitly.

If you have a conventional flip lens welding helmet and are prone to getting arc eyes from "peeping" though a gap to strike your arc, try this.<br /> Replace the inside fixed clear lens in your helmet with a yellow perspex lens. The world will appear strange at first through the yellow lens, but the yellow cuts out the ultra violet rays that cause arc eyes. The yellow lens should not be considered a replacement for the dark glass, it is only to shield you from that inadvertant flash when making your strike.