My km 1635 diplays c2300 how do you solve this?it does not copy anymore

probably your transfer setting is incorrect paper is not separating from the drum soon enough

download the latest version of driver fro win 7.run the software and then connnect the machine to laptop when it asks to.thats it

clean the optics section,main charger and laser scanning unit assy particularly tha polygon mirror

how to solve the enter job accnt of kyocera km 1635?

Check the suction fan.

According to the manual you can not scan with it. Sorry. Also here is the manual if you need it.

http://www.kyoceramita.eu/dlc/eu/documentation/usermanual/km-1635-2035-og-uk.-downloadcenteritem-Single-File.downloadcenteritem.tmp/KM-1635-2035-OG-UK.pdf

Good luck and please rate

it may be the problem of moisture dont worry take brasso(used for shining the mitallic products) and put out photo conducting drum and clean the dum with brasso by using a soft cotton cloth ur problem must be solved

you have a problem in the fuser/fixing section. error code should be 4 digits long to correctly identify the problem

try to inquire from Al Shaqsi Trading in Dubai UAE log at their website at www.astuae.com they might have solution from your toner problem

Is one side lighter then the other side of the copy? Meaning uneven copy darkness? If so, I believe the problem is that one or both sides of the drum cartridge and the developer are not connected correctly. The two parts need to be close togather to make a nice dark copy. This model has a very wierd drum unit and has a defect that one or both side of the drum unit locking tabs break and you get very light or blank copies. It's some what coastly to replace the whole unit... That would be a worse case.... If it is just on one side you might be able to push on the cover on the side that is light. If the copies come out better. One side is broken..I would fold up some paper and make a wedge to push the catridges closer. Good Luck