I was in process of reprogramming Direct TV universal remote, I was inputting codes so I could get my TV to be on one remote when my LG 32LH30 just went white. Won't turn off or on, I have unplugged tv and left off and when plugged back in it goes right back to white screen and it shows a screen on top that says Power Only V04.52.00. My regular remote for tv will not work to turn off and on. I also reset the Direct TV remote which did not help with anything either. Please help.
My TV does this too. i know how to remove the white screen but the top will still have power only vo4.52.00 to get rid of the white screen press 'return' on your TV remote (not direct tv remote) then change the input pack to whatever it is it needs to be on to watch your (whatever)
I hit the Q.Menu button and held it then I held the back button. One of them worked.I hit the Q.Menu button and held it then I held the back button. One of them worked.
You can't post conmments that contain an email address.
I have the smaller version of this LG TV and it did the same, just went to a blank white screen when I switched it on. Being very close to paying for it to be repaired or even buying a new one cause that's sometimes easier and cheaper! I decided to try look for a solution online and found this. Although the 'return' button didn't work for me I found the 'Q. View' button did so I recommend if neither of those buttons work simply press all the buttons on the remote or even press and hold. Hope this works, good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First you need to find the program button or input button. Almost all universal remotes are the same process for programing.Aim the remote at the tv and push the tv device button once then use the program or input button push and hold till the light blinks twice or stays on then put in your 3 or 4 digit code and press enter.
Universal remote code to check with Vizio TV is [0081. Direct Code Entry
Press and hold the SETUP button until the red indicator stays on, then
release the SETUP button.
Press and release the desired Mode button (TV, VCR, etc.). The red indicator
blinks, then stays lit.
Enter the 4 digit code from the code tables. Note: after a valid code entry,
the red indicator turns off. For an invalid code, the red indicator flashes.
With your device on, press CHANNEL UP. If the device responds, no further
programming is required. Note: If some buttons do not operate your device, try
one of the other codes for your brand. If you want to get more details and codes to different remote controls, check this.
There are control buttons on the side of the tv. Usually just on/off, volume, channel and menu. Go it menu using these buttons to navigate. Reset tv to default settings or sometimes called factory settings. This should get colour back. Download or read instructions on your remote and reprogram. Sometimes with modern universal remotes you need to program them through your PC with a specific application downloaded from remote manufacturer.
Trying to program a universal remote can sometimes be a frustrating process. Successful programming of a universal remote depends on whether the universal remote manufacturer included our company’s information in the remote when it was assembled. Then a cable company (ie., Comcast) or satellite provider (ie., Dish Network) orders their decoder box and universal remote control from a manufacturer (ie., Scientific Atlanta, Motorola, etc.), the decoder box manufacturer provides a list of all the possible remote controls this universal can duplicate. From that list the cable company or satellite selects which manufacture’s products to include on their new universal remote. Once those manufacturers names have been decided, they are placed on the universal remote and a numeric code is assigned. If they choose not to include our company on the universal remote, the universal remote may not access the Maxent screen. If you cannot locate Maxent on the list provided to you by the universal remote provider, please try the following: Through contact with various cable and satellite content providers we have developed a list of the most common numeric codes that are used with universal remotes. Content Provider/Most commonly used code Comcast: 1755 Comcast (ML-3251HLT Model): 0054 Insight: 1755 Direct TV: 11755 Dish Network: 742 Cable Vision: 165 Adelphia: 0156, 1755 Universal: 0762 One4All: 0036 Time Warner: 0230
We have identified other manufacturers of display products that have similar remote control information to ours. Depending on the universal remote you are using these manufacturers may work. Please use the documentation that accompanied your universal remote, and look up the following companies. Input the numeric code associate with that company. Gateway Sampo Viewsonic Magnavox Phillips Marantz Pilot If the universal remote you are trying to program contains a Code Search (the remote will scan through all the codes contained within the universal remote) function, we recommend that you try that procedure. It is possible that there may be another manufacturer code that may work with our monitor. You may also want to try a Learning Remote from another manufacturer. This type of remote control can absorb or record the information coming directly out of the Maxent remote control. The learning remote then duplicates that information and acts like the Maxent Remote control. This type of remote can also record the signal coming from your other universal remotes in the same manner. In which case you can use this learning remote for your entire audio video system
×