After days of back and forth from allign cartridge to paper too narrow, to paper jam, to align cartridge to paper too narrow, to paper jam, maybe one successful print job,and then back to the align cartridge, paper too narrow, to paper jam over and over - have tried, looking at cartridges, check correct number, check for proper attachment, check for paper problems, check connection, check everything - now printer will not do any thing - no cartridge messages, no paper jam messages, no paper too narrow message, no successful print jobs - what should I do?
Thanks to smunteanu, cleaning the optical sensor lens with a wet cuetip did the trick. Thanks so much.
Fiend your solution direct from hp. Here is your solution...
http://www.hp.com/printer/prob676ijt65/solution
812
HP office jet 6110 all-in-one Printer will not print off internet, comes out gibberish.
Hey there.
Looking at the print cartidges in the right side you'll find a small black cap. Under the cap is hidden the calibration optical sensor. It's job is to meassure the paper and to calibrate the cartridges. Try to clean it from underneath (the lens). If it still doesn't work, you have to replace the sensor... A HP service should be you last hope.
P.S.:
The PSC 2xxx series and DJ 5xxx series have the same sensor.
Good luck
SOURCE: HP OfficeJet 6110 All-In-One
go to hp.com, support and troubleshooting, type in your pirnter model number and download the user manual. follow the direction to disassemble the printer. you might not need to disasseble the printer, if you can see the jammed paper.
follow the direction and clean the roller and the printer head.
it should work.
SOURCE: HP OfficeJet 6110 All-In-One
To start with first try a reset:
Unplug the power cord from the All-In-One as well as the power outlet when there is still power in the All-In-One. and wait for atleast 1Min
Plug the power cord directly to a wall outlet without surg protector. (if possible connect it to a different power outlet)
Before connecting the power cord to the All-In-One press and hold the # and no 6 button and then insert the power cord, do not release the keys
until you see a message a reset (if the screen goes blank then release the keys and turn the power on)
Then check and see
If not try the link bellow:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=bpu00804&dlc=en&product=79477
Good Luck please let me known if nay problem.
882 views
Usually answered in minutes!
after days of back and forth from allign cartridge
to paper too narrow, to paper jam, to align cartridge to paper too narrow, to paper jam, maybe one successful print job
,and
then back to the align cartridge, paper too narrow, to paper jam over
and over - have tried, looking at cartridges, check correct number,
check for proper attachment, check for paper problems, check
connection, check everything - now printer will not do any thing - no
cartridge messages, no paper jam messages, no paper too narrow message,
no successful print jobs - what should I do?
how do you fix this problem
My HP 6110 printer will not read my new ink cartridges. Message on screen replace ink cartridge.
Replaced color cartridge and now I get a message saying to "remove and check cartridge" what could be the problem?
same
×