Looking for anyone who knows the reset for a ViewSonic VX2035WM?

Try connecting the monitor to your computer via a VGA cable instead of DVI. (The blue instead of white cable)

I've been having the same problems with my Viewsonic.I plug it in and the blue light blinks but there's no picture it's just a black screen.I do know if Viewsonic doesn't repair my monitor I'll never buy anything from them again.I have the LCD Viewsonic 22' Vx2235wm monitor.
Does anyone have any idea what could be wrong with mine?I've bought a new video cable & video card but the monitor still does the same thing?Thanks

More likely to have bad DC filter caps just like these failed VIEWSONIC here:

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Please post back what you find.

check ur products detail in below linkhttp://www.viewsonic.com/products/desktop-monitors/lcd/x-series/vx2035wm.htm

You may have failing DC filter caps in the power supply just like Viewsonic monitors you can see in my albums, you is about the same as 2235.
If you are not going to DIY you will be better off putting the money toward new monitor, estimate repair up to $100.
http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

This is common problem, look for bad caps in the power supply.
Learn more and see the pictures of failed Viewsonic and other brand here:
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Hi,

There could be a problem on your Graphics card, if it keeps on turning off the display. (either, graphics card driver, or hardware problem).

Try removing the cable (either VGA or DVi) attached at the computer and see if there is a self test feature that will be displayed. If none, then the problem is on your viewsonic.

Hope this helps.

As it's less than 3 months old the it is still under warranty so return it for replacement.

It sounds like your monitor is looking for an analog signal from the D-SUB connector while you are using the DVI connector. Go into the monitor's main menu and choose Input Select. Change the setting to Digital. You should now see yourr desktop.

since you had a power surge, it sounds like you may have something wrong in your power supply. please check all standy voltages comming from this supply, if they are low, then expect to be replacing caps or leaky diods.