Taking video gives me 3 second video on replay

The version you may have might not be updated. It is best to just get a new Action Replay the latest version has the new codes. AND BE CAREFUL PLAYING WITH ACTION REPLAY on the DSI and 3 RD
Hope this helps.

if it wont come up at all i dont know

if it comes up but keeps giving you blue and red lines, do this:


1 with the console powered off, hold a+b
2 power up the console while still holding A+B
3 as soon as the nintendo screen is displayed, before our screen stating this product is not endorsed by nintendo, press and hold start and select while keeping hold of a+b
4 continue to hold these buttons until the main action replay screen is displayed, then release. your product is reset, and will accept codes once more

Your Action Replay DS hardware may require resetting if you are experiencing any of the following problems:

* Code Manager PC software is reporting that Action Replay DS does not contain enough free space when it actually contains no codes.

* Code Manager PC software is reporting the console`s battery is low when it’s actually fully charged.

* Multicolored bars are shown on the screen after you confirm the entry of a game ID when trying to manually enter codes.

* You can use the Code Manager PC software without any problems until the Action Replay DS is connected via USB set to the update mode on the console, at which point Windows shows a run time error.

If you are experiencing any of these problems, please follow the steps below to reset the Action Replay DS hardware. Please beware that resetting the Action Replay DS hardware will not restore a default codelist, and any codes which are stored on the Action Replay DS will be erased.

1. With your console powered off insert the Action Replay DS

2. Hold down buttons A+B

3. Turn your console on

4. With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down

5. Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen

6. If Action Replay DS doesn’t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again

When you have the cheats in front of you ,you must check in the box.That will activate the cheat and it may take a few seconds to work in the game...

reset it

1. With your console powered off insert the Action Replay DS
2. Hold down buttons A+B
3. Turn your console on
4. With A+B still held down, as soon as you see the Action Replay DS license screen press and hold down buttons START+SELECT so that you now have 4 buttons held down
5. Hold all 4 buttons down for around 10 seconds until the Action Replay DS loads to it`s home screen
6. If Action Replay DS doesn’t hold on the license screen for around 10 seconds when you do this, you may need to turn off and try again
7. take a while but will work

I could not understand what you just wrote.

Yes, a video would be best.

Although it sounds like the loading motor might be faulty.

- OPTiC

Pioneer DJ Repair Videos
Pioneer DJ Repair
Pioneer Parts
DJ Parts
Pioneer DJ Equipment Sales
Audio Video Accessories

NO you don't,my friend has it and his works usually sometimes it blank too.I'll ask him how you should do it.

To free up memory on your Action Replay, just delete the codes of games that you don't have either through the DS or the Code Manager. CodeJunkies gives you hundreds of games/codes, I only have ten games (give or take a few), which means the other 90-some games are just sitting there hogging space

take the game out and blow in the DS card slot put the game back in and if that doesn't work take it to a game store ask them what you should try

Attaching Sound Memos to images In replay mode (including single replay, index replay and magnifying replay) you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in WAVE format. 1. Select [ (Sound Memo)] in the [ (Replay)] menu.
appears
2. Select the image to which you wish to add a sound memo using the or button, then press the <SET> button.
The A/V panel appears.
3. Select [ (Record)] using the or button, then press the <SET> button.

• The recording starts and the elapsed time is displayed. Speak towards the microphone of the camera.
• To stop recording, press the <SET> button. To restart recording press the <SET> button again.
• You can add as many sound memos as you like until their total time reaches 60 seconds.