55PP935217 PHILIPS HDTV I THINK ITS A 55 INCH PROJECTION HDTV....
HAVE RED AND BLUE LINES AROUND ALL THINGS THAT APPEAR ON SCREEN .. WENT TO A SETTING TO TRY TO MATCH UP THE BLUE AND THE RED ON THESE CROSSES YOU MIGHT KNOW WHAT I MEAN AND RESET FACTORY SETTING BUT IT DIDNT HELP . NOW GETTING WORSE ..HELP
An ic (it is usually capatilized as IC) is an acronym for intigrated circuit.
What is an ic and no im not a noob
Change the convergence ICs also check the resistors right next to the ICs as 1 or 2 of them may be open as well.
580 views
Usually answered in minutes!
> change the convergence ICs also check the resistors right next to the
> ICs as 1 or 2 of them may be open as well.
What is an IC, and where can I find the IC and resistor?
Thank you.
> change the convergence ICs also check the resistors right next to the
> ICs as 1 or 2 of them may be open as well.
What is an IC and where can I find them? Also what do I do if the resistor is open?
Thank you.
Trube
Mine is not red and blue, but just red lines. Would changing the convergence I C solve the problem and where is it located?
I have the same problem with the convergence ICs. I ordered the new ICs andinstalled them. Made 100% sure about the solder job. Fairly easy job. Now picture is worse than before. Before I could adjust the vertical convergence, now I can't control vert. or horz. Also the picture is bowing in from the top and bottom and the picture is extremmly red in color. A friend told me I might have the IC box(silver box) not plugged in properly with the ribbon wires. Any ideas? Thanks in advance.
Philips 55PP935217
Hello ,
I'm having similar problems, when I go to manual converging I can see the blue appears to be lined correctly?
When I try to line the red to green it will not work.
I can move the the + around to each location but cannot get them to line up together.
I keep reading about the IC'S, could this be my problem?
I do not want to open the back of the set until I know a solution.
I will order a set of IC'S if this may be the problem?
Where would be the best location to order?
Can anybody tell me how to locate these chips on the board or is it obvious when I have the new IC'S?
color is messed uo. picture curves. looks like blue and green are ok, butthe red is off. tried to allign it, but didn't work. no tv repair men in my area. i'm pretty handy. any ideas,and if so where do i start. th tv is only 4 years old.
how do I fix my TV's color from the picture being all red I tried everything.
×