Hi i was wondering if you help.my hoover hd vision

probly the door interlocks at fault

unplug it now and see if that helps

the bearing are gone

I have hoover vision hd 1400 aaa
In proble stain blaster
I oll redy clean thing and check water vest pipe
Nothing to blocking

i now have same problem- did you get a solution?

Ihave a Hoover Vision HD washing machine and the "Door Security" light keeps flashing. I have looked in the manual and it says the door is not properly shut. However the door is correctly shut and as a result the machine will not operate . The door will open or close but will not start a cycle to wash. Any suggestions please????

Hi from retired Englishman in SW France,

Error 4 for Hoover HD Vision machines decodes as 'antiflood pressure stat, faulty inlet valve'.
Sorry but that means a repair man visit- nothing we can do other than advise that ;-0(

If this has at least clarified the situation with your washer please consider a 4 thumbs up for the rating.

Thanks and good luck,
John C

can I have the instruction how to use for HOOVER vision HD 1400 AA+A. I lost the manual

Had same problem wouldnt spin found clip on motor had come loose pushed it back on problem solved!

Hi On my washer when I press the start button when allready in opperation all the lkights flash and it stops as this second press of the button pauses the machine and need the start button to be pressed again to restart the machine
Hope that is cleas and helps
Angela